Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
Prochaine révision
Révision précédente
liste_portables_asus [Le 11/08/2020, 20:54]
Olivier V [A]
liste_portables_asus [Le 11/02/2024, 07:09] (Version actuelle)
89.82.16.94 [M]
Ligne 32: Ligne 32:
 les problèmes d'​activation du wifi (notamment l'​activation de la combinaison de touches ​ Fn+F2) peuvent parfois se résoudre en modifiant le fichier /​etc/​default/​grub (vous pouvez l'​ouvrir en tapant sudo gedit /​etc/​default/​grub) les problèmes d'​activation du wifi (notamment l'​activation de la combinaison de touches ​ Fn+F2) peuvent parfois se résoudre en modifiant le fichier /​etc/​default/​grub (vous pouvez l'​ouvrir en tapant sudo gedit /​etc/​default/​grub)
  
-modifier la ligne +modifier la ligne
 RUB_CMDLINE_LINUX_DEFAULT="​quiet splash"​ RUB_CMDLINE_LINUX_DEFAULT="​quiet splash"​
 par par
Ligne 56: Ligne 56:
 ===== A ===== ===== A =====
  
-^ Modèle ​ ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ +^ Modèle ​ ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
 | A3G-5002H |{{wiki:​modeles:​laptop_work.png|Fonctionne après config}}| 5.04 | webcam, touches multimédias | | A3G-5002H |{{wiki:​modeles:​laptop_work.png|Fonctionne après config}}| 5.04 | webcam, touches multimédias |
 | A3500G |{{wiki:​modeles:​laptop_work.png|Fonctionne après config}}| 5.04 | webcam, touches multimédias | | A3500G |{{wiki:​modeles:​laptop_work.png|Fonctionne après config}}| 5.04 | webcam, touches multimédias |
-| A40J |{{:​icons:​ok_64.png|64 bits}} |10.10|microphone de la webcam, touchpad multitouches (scrolling à 2 doigts). Wired connexion (connexion par cable). <br />​Drivers de ATI 5470 à installer. Lorsque online: System > Administration > Drivers additionnels. Redémarrer et c'est ok ! <​br>​note:​ surchauffe lors de la 1ère installation de ubuntu. Installation,​ voir:  [[http://​www.dedoimedo.com/​computers/​dual-boot-windows-7-ubuntu.html|How to install Windows 7 and Ubuntu side by side (Window 7, puis Ubuntu)]]|+| A40J |{{:​icons:​ok_64.png|64 bits}} |10.10|microphone de la webcam, touchpad multitouches (scrolling à 2 doigts). Wired connexion (connexion par cable). <br />​Drivers de ATI 5470 à installer. Lorsque online: System > Administration > Drivers additionnels. Redémarrer et c'est ok ! <​br>​note:​ surchauffe lors de la 1ère installation de ubuntu. Installation,​ voir:  [[https://​www.dedoimedo.com/​computers/​dual-boot-windows-7-ubuntu.html|How to install Windows 7 and Ubuntu side by side (Window 7, puis Ubuntu)]]|
 | A42J |{{:​icons:​ok_64.png|64 bits}} |10.10|webcam,​ touchpad multitouches (scrolling à 2 doigts)| | A42J |{{:​icons:​ok_64.png|64 bits}} |10.10|webcam,​ touchpad multitouches (scrolling à 2 doigts)|
 | A52D | {{:​icons:​ok_32_64.png|32 64 bits}} | 10.10 | - | | A52D | {{:​icons:​ok_32_64.png|32 64 bits}} | 10.10 | - |
Ligne 101: Ligne 101:
 | [[:​asus_at3iont-i_deluxe|AT3ion-i deluxe]] |{{:​icons:​ok_32.png|32 bits}}|13.04 | Problème de télécommande et de son | | [[:​asus_at3iont-i_deluxe|AT3ion-i deluxe]] |{{:​icons:​ok_32.png|32 bits}}|13.04 | Problème de télécommande et de son |
 | [[:​asus-a17-tuf766iu|Asus A17-TUF766IU-H7074T]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04 | Référencé plus bas dans le [[:​liste_portables_asus#​tuf|paragraphe dédié au tuf]] et [[:​asus-a17-tuf766iu|cette page dédiée au portable Asus A17-TUF766IU-H7074T ]]| | [[:​asus-a17-tuf766iu|Asus A17-TUF766IU-H7074T]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04 | Référencé plus bas dans le [[:​liste_portables_asus#​tuf|paragraphe dédié au tuf]] et [[:​asus-a17-tuf766iu|cette page dédiée au portable Asus A17-TUF766IU-H7074T ]]|
 +| Zenbook UX480FD / UX450FD |{{icons:​process-stop.png|Ne fonctionne pas}}| 20.04 | Problèmes avec les ventilateurs et les cartes graphiques. Surchauffe, surconsommation de la batterie et problèmes de performances. Manipulations complexes et non-abouties. Pas de Screenpad pour le 480FD |
 ===== B ===== ===== B =====
  
Ligne 108: Ligne 109:
 ===== C ===== ===== C =====
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| C90S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 et 10.10 |Webcam (résolu après installation du pilote [[http://​sourceforge.net/​projects/​gl860/​|gl860]] - Infos sur le [[http://​gl860.sourceforge.net/​|site du Projet gl860]]), touches multimédia (ne fonctionne pas toutes)|+| C90S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 et 10.10 |Webcam (résolu après installation du pilote [[https://​sourceforge.net/​projects/​gl860/​|gl860]] - Infos sur le [[http://​gl860.sourceforge.net/​|site du Projet gl860]]), touches multimédia (ne fonctionne pas toutes)|
 | C90P | | - | - | | C90P | | - | - |
  
-===== E ===== +===== E =====
 Voir également la documentation génarale sur les **[[:​asus_eee_pc|Eee PC]]**. Voir également la documentation génarale sur les **[[:​asus_eee_pc|Eee PC]]**.
  
Ligne 119: Ligne 120:
 | E202SA-FD0087T | {{:​icons:​ok_64.png|64 bits}} | 18.04 LTS | Installation en EFI et en supprimant Windows 10. Désactiver Secure Boot et Fast Boot, activer le mode USB Legacy et tout fonctionne parfaitement tout de suite après l'​installation. C'est le modèle avec 4 GO de RAM, 1 TO de HDD, et un Celeron N3710. Toutes les fonctionnalités du matériel sont supportées out of the box. | | E202SA-FD0087T | {{:​icons:​ok_64.png|64 bits}} | 18.04 LTS | Installation en EFI et en supprimant Windows 10. Désactiver Secure Boot et Fast Boot, activer le mode USB Legacy et tout fonctionne parfaitement tout de suite après l'​installation. C'est le modèle avec 4 GO de RAM, 1 TO de HDD, et un Celeron N3710. Toutes les fonctionnalités du matériel sont supportées out of the box. |
 | E202SA | {{:​icons:​ok_64.png|64 bits}} |**[[:​wily|15.10]]** **[[:​xenial|16.04]]**| - Installation en mode EFI de Ubuntu 15.10 64bits en dual-boot avec Windows 10 pré-installé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1917191|pierolalune]] / Sur le noyau 4.2.x (entre autre sous wily), un certain nombre d'​utilisateurs rapportent un problème de freeze lors du boot sur la batterie : ce problème est du à la carte Wifi. Il est nécessaire de mettre à jour le noyau en version 4.3 au minimum pour corriger ce problème ou de rajouter dans la ligne de commande linux (accessible depuis grub) le paramètre de boot "​pci=nomsi"​ pour contourner le souci. Voir le détail [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1948291|ici]] (à partir du post #42 d'​inakoll) / Le touchpad multitouch n'est pas encore supporté, un fix devrait arriver sur la prochaine révision du noyau (contribution de [[https://​lkml.org/​lkml/​2015/​8/​24/​647|Dmitry]]),​ le noyau en version 4.3 semble également apporter quelques améliorations en terme de fonctionnalités du touchpad (maintenir la touche Ctrl pour utiliser le multitouch). \\ - Installation en mode EFI de Ubuntu 16.04 64bits en dual-boot avec Windows 10 pré-installé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1999047|arbras]] / connexion wifi parfois instable et aucun correctif stable connu pour le moment, mais différentes solutions à tester, voir forum | | E202SA | {{:​icons:​ok_64.png|64 bits}} |**[[:​wily|15.10]]** **[[:​xenial|16.04]]**| - Installation en mode EFI de Ubuntu 15.10 64bits en dual-boot avec Windows 10 pré-installé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1917191|pierolalune]] / Sur le noyau 4.2.x (entre autre sous wily), un certain nombre d'​utilisateurs rapportent un problème de freeze lors du boot sur la batterie : ce problème est du à la carte Wifi. Il est nécessaire de mettre à jour le noyau en version 4.3 au minimum pour corriger ce problème ou de rajouter dans la ligne de commande linux (accessible depuis grub) le paramètre de boot "​pci=nomsi"​ pour contourner le souci. Voir le détail [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1948291|ici]] (à partir du post #42 d'​inakoll) / Le touchpad multitouch n'est pas encore supporté, un fix devrait arriver sur la prochaine révision du noyau (contribution de [[https://​lkml.org/​lkml/​2015/​8/​24/​647|Dmitry]]),​ le noyau en version 4.3 semble également apporter quelques améliorations en terme de fonctionnalités du touchpad (maintenir la touche Ctrl pour utiliser le multitouch). \\ - Installation en mode EFI de Ubuntu 16.04 64bits en dual-boot avec Windows 10 pré-installé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1999047|arbras]] / connexion wifi parfois instable et aucun correctif stable connu pour le moment, mais différentes solutions à tester, voir forum |
-| E203NA-FD026T | {{:​icons:​ok_64.png|64 bits}} |**[[:​artful|17.10]]**| Installation en mode EFI de Lubuntu 17.10 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot désactivé. Voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020804|Kaaria]] |+| E203NA-FD026T | {{:​icons:​ok_64.png|64 bits}} |**[[:​artful|17.10]]**| Installation en mode EFI de Lubuntu 17.10 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot désactivé. Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020804|Kaaria]] | 
 +| E203MA-FD004TS | {{:​icons:​ok_64.png|64 bits}} |**[[:​20.04]]**| Installation en dual boot avec windows 10. mode EFI de lubuntu 64 bits avec Unity en DE.Fonctionement fluide. tout fonctionne out of the box, même les raccourcis claviers. Secure Boot désactivé.| 
 | E203NA-FD035T | {{:​icons:​ok_64.png|64 bits}} |**[[:​artful|17.10]]**| Installation en mode EFI de Xubuntu 17.10 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot laissé activé. Voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21859799#​p21859799|LordGG]] | | E203NA-FD035T | {{:​icons:​ok_64.png|64 bits}} |**[[:​artful|17.10]]**| Installation en mode EFI de Xubuntu 17.10 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot laissé activé. Voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21859799#​p21859799|LordGG]] |
 | E203NA-FD059T| {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI de Lubuntu 18.04 64 bits (Windows 10 S préinstallé supprimé). Secure Boot désactivé.[[http://​paste.ubuntu.com/​p/​pgHgvDwWsM/​|boot-info]]| | E203NA-FD059T| {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI de Lubuntu 18.04 64 bits (Windows 10 S préinstallé supprimé). Secure Boot désactivé.[[http://​paste.ubuntu.com/​p/​pgHgvDwWsM/​|boot-info]]|
 | E203NA-FD084T| {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI d'​Ubuntu MATE 18.04.1 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot désactivé.| | E203NA-FD084T| {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI d'​Ubuntu MATE 18.04.1 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot désactivé.|
 +| E203NA-FD084TS| {{:​icons:​ok_64.png|64 bits}} |**[[:​focal|20.04]]**| Installation en mode EFI de LUBUNTU 20.04.1 64 bits (Windows 10 S préinstallé s'est fait virer). Secure Boot désactivé. WiFi, Bluetooth... tout fonctionne.|
 +| E210MA-GJ969WS| {{:​icons:​ok_64.png|64 bits}} |**[[:​focal|22.04]]**| Installation en live usb de Linux Mint 21 64 bits (Windows 11 préinstallé supprimé). Il faut installer un pilote additionnel pour pouvoir utiliser la carte wifi. Le numpad sur le touchpad n'est pas reconnu nativement et il faut installer un programme phyton pour qu'il fonctionne. WiFi, Bluetooth... tout fonctionne.|
 | EeeBook E402MA-WX0001T | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**| Installation en mode EFI de Ubuntu 16.04.3 64 bits  à la place Windows 10 pré-installé car présence d'un seul SSD de 32 Go. ISO téléchargée avant l'​exécution de unetbootin : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21835358#​p21834881|crapo]] | | EeeBook E402MA-WX0001T | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**| Installation en mode EFI de Ubuntu 16.04.3 64 bits  à la place Windows 10 pré-installé car présence d'un seul SSD de 32 Go. ISO téléchargée avant l'​exécution de unetbootin : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21835358#​p21834881|crapo]] |
 | E402NA-GA029T | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**| Installation en mode EFI de Ubuntu 16.04.4 64 bits (Windows 10 S préinstallé s'est fait virer) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2025585|Ezzmazz]] | | E402NA-GA029T | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**| Installation en mode EFI de Ubuntu 16.04.4 64 bits (Windows 10 S préinstallé s'est fait virer) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2025585|Ezzmazz]] |
 | E402NA-GA058T | {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI de Ubuntu 18.04 64 bits (Windows 10 préinstallé s'est fait virer). La WiFi ne fonctionne pas : c'est un pb qui reste à résoudre : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2025954|boum]] | | E402NA-GA058T | {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI de Ubuntu 18.04 64 bits (Windows 10 préinstallé s'est fait virer). La WiFi ne fonctionne pas : c'est un pb qui reste à résoudre : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2025954|boum]] |
 | E402YA-GA002TS | {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI de Ubuntu 18.04.3 64 bits (Windows 10S préinstallé s'est fait virer) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2043798|JCSekinger]] | | E402YA-GA002TS | {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**| Installation en mode EFI de Ubuntu 18.04.3 64 bits (Windows 10S préinstallé s'est fait virer) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2043798|JCSekinger]] |
 +| E410MA-EK1824WS | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} |**[[:​jammy|22.04]]**| Installation en mode EFI de Ubuntu 22.04 64 bits (Windows 11 préinstallé supprimé). Il faut un adapteur usb-> RJ45 pour connecter l'​ordinateur et installer le pilote additionnel propriétaire pour pouvoir utiliser la carte wifi. Le numpad sur le touchpad n'est pas reconnu nativement et il faut installer un programme phyton pour qu'il fonctionne en choisissant le modèle m433ia : [[https://​www.linuxuprising.com/​2021/​05/​how-to-get-numpad-embedded-into.html|Procédure d'​instalation]] et [[https://​github.com/​mohamed-badaoui/​asus-touchpad-numpad-driver|Github du projet]]|
 |EeeBook X205TA |  {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04 | Voir [[https://​github.com/​lopaka/​instructions/​blob/​master/​ubuntu-16.04-install-asus-x205ta.md|ici]] et cet [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=20634281#​p20634281|post du forum]].| |EeeBook X205TA |  {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04 | Voir [[https://​github.com/​lopaka/​instructions/​blob/​master/​ubuntu-16.04-install-asus-x205ta.md|ici]] et cet [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=20634281#​p20634281|post du forum]].|
 | Eee Box | {{:​icons:​ok_32.png|32 bits}} | 9.04 | | | Eee Box | {{:​icons:​ok_32.png|32 bits}} | 9.04 | |
Ligne 135: Ligne 141:
 | Eee PC 901 | {{:​icons:​ok_32.png|32 bits}} | **[[:​precise|12.04]]** 12.10 | [[:​utilisateurs:​percherie]] et [[:​utilisateurs:​owintwist]] | | Eee PC 901 | {{:​icons:​ok_32.png|32 bits}} | **[[:​precise|12.04]]** 12.10 | [[:​utilisateurs:​percherie]] et [[:​utilisateurs:​owintwist]] |
 | Eee PC 904 | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | - | | Eee PC 904 | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | - |
-| Eee PC 1000 | {{:​icons:​ok_32.png|32 bits}} | **[[:trusty|14.04]]** | Xubuntu [[:​utilisateurs:​Teilginn]][[:​utilisateurs:​spyro]] ​|+| Eee PC 1000 | {{:​icons:​ok_32.png|32 bits}} | **[[:bionic|18.04]]** | Lubuntu ​|
 | Eee PC 1001 | {{:​icons:​ok_32.png|32 bits}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** **[[:​trusty|14.04]]** 15.04 | Depuis 14.04 activez la carte wifi manuellement en passant par le Bios. Maintenez la touche F2 au démarrage pour arriver sur le Bios. De là, allez sur **Advanced -> sur Onboard Devices Configuration**. Dans la liste, il y a une ligne Onboard WLAN. Passez l'​option en Enabled. Fait ensuite F10 pour enregistrer et sortir du Bios. Dès ce moment, la diode sur le devant à droite correspondant au Wifi est allumé et le wifi fonctionne. Ne pas utiliser la touche Fn+F2 ensuite, le wifi ne fonctionnerait plus (sauf après redémarrage). La webcam ne semble plus reconnu non plus sur la version 15.04. Elle ne fonctionne pas avec Skype et guvcviewer installé sur Lubuntu. Pas de solution pour l'​instant. [[:​utilisateurs:​blafy_]] [[:​utilisateurs:​angelus62400]] [[:​utilisateurs:​nimoinau]] | | Eee PC 1001 | {{:​icons:​ok_32.png|32 bits}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** **[[:​trusty|14.04]]** 15.04 | Depuis 14.04 activez la carte wifi manuellement en passant par le Bios. Maintenez la touche F2 au démarrage pour arriver sur le Bios. De là, allez sur **Advanced -> sur Onboard Devices Configuration**. Dans la liste, il y a une ligne Onboard WLAN. Passez l'​option en Enabled. Fait ensuite F10 pour enregistrer et sortir du Bios. Dès ce moment, la diode sur le devant à droite correspondant au Wifi est allumé et le wifi fonctionne. Ne pas utiliser la touche Fn+F2 ensuite, le wifi ne fonctionnerait plus (sauf après redémarrage). La webcam ne semble plus reconnu non plus sur la version 15.04. Elle ne fonctionne pas avec Skype et guvcviewer installé sur Lubuntu. Pas de solution pour l'​instant. [[:​utilisateurs:​blafy_]] [[:​utilisateurs:​angelus62400]] [[:​utilisateurs:​nimoinau]] |
 | Eee PC 1005 | {{:​icons:​ok_32.png|32 bits}} | **[[:​xenial|16.04]]** | En cas de problème wifi voir cette [[:​wifi_liste_carte#​atheros|page]] | | Eee PC 1005 | {{:​icons:​ok_32.png|32 bits}} | **[[:​xenial|16.04]]** | En cas de problème wifi voir cette [[:​wifi_liste_carte#​atheros|page]] |
 | Eee PC 1008 | {{:​icons:​ok_32.png|32 bits}} | 10.10 | [[:​utilisateurs:​corneliux]],​ [[:​utilisateurs:​lucky6]] | | Eee PC 1008 | {{:​icons:​ok_32.png|32 bits}} | 10.10 | [[:​utilisateurs:​corneliux]],​ [[:​utilisateurs:​lucky6]] |
 +| Eee PC 1011 | {{:​icons:​ok_32.png|32 bits}} | 15.04 | **[[http://​forum.ubuntu-fr.org/​profile.php?​id=482701|lepetitnouveau]]** |
 | Eee PC 1015 | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​precise|12.04]]** 12.10 | - | | Eee PC 1015 | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​precise|12.04]]** 12.10 | - |
 | Eee PC 1015BX | {{:​icons:​ok_32_64.png|32 et 64 bits}} |13.10 | Exemple d'​installation de Xubuntu 12.10 32 bits: [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=13052891#​p13052891|post de Chikøumi]] Recommandé de mettre Lubuntu pour avoir de la fluidité | | Eee PC 1015BX | {{:​icons:​ok_32_64.png|32 et 64 bits}} |13.10 | Exemple d'​installation de Xubuntu 12.10 32 bits: [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=13052891#​p13052891|post de Chikøumi]] Recommandé de mettre Lubuntu pour avoir de la fluidité |
-| Eee PC 1015E-CY040H | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | Exemple d'​installation de Ubuntu **[[:​precise|12.04]]** 64 bits à la place de Windows 8 préinstallé : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1353561|post de teodorino]] |+| Eee PC 1015E-CY040H | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | Exemple d'​installation de Ubuntu **[[:​precise|12.04]]** 64 bits à la place de Windows 8 préinstallé : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1353561|post de teodorino]] |
 | Eee PC 1015PX | {{:​icons:​ok_32.png|32 bits}} | **[[:​bionic|18.04]]** | Problème: pas de son (contournement:​ taper un terminal "sudo alsactl init" pour le rétablir jusqu'​au prochain redémarrage). Distrib testée: Lubuntu 18.04.1 | | Eee PC 1015PX | {{:​icons:​ok_32.png|32 bits}} | **[[:​bionic|18.04]]** | Problème: pas de son (contournement:​ taper un terminal "sudo alsactl init" pour le rétablir jusqu'​au prochain redémarrage). Distrib testée: Lubuntu 18.04.1 |
 | Eee PC 1018 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 11.04 | Le bouton d'​alimentation de la connectivité sans fils est fonctionnel mais coupe automatiquement uniquement la connectivité WIFI pour que l’indicateur lumineux d'​alimentation de la connectivité sans fils s'​éteigne il faut désactiver le Bluetooth grâce à l'​applet gnome-bluetooth. Le Bouton "Asus Express Gate" n'est plus fonctionnel. Il est considéré comme le bouton d'​alimentation. Pour augmenter la quantité de mémoire vive et passer à 2 Gio il est nécessaire de flasher le bios, opération qui est facilement réalisable avec l'​utilitaire intégré au bios mais celui-ci ne reconnaît pas les clef USB quel-que-soit le formatage. La solution est d'​utiliser un lecteur cd externe. Attention : le flashage du bios est une manipulation risqué et il n'est pas exclu de rendre ainsi la machine inutilisable.\\ Un gain de 30 mn de fonctionnement sur batterie est obtenu en ôtant une barre sur deux à grille de protection de la sortie du ventilateur (sur le flanc gauche) ce qui permet un refroidissement plus efficace mais une augmentation du bruit (manipulation a effectuer a vos risques et périls bien sûr). [[:​utilisateurs:​upRIlIon]],​ [[:​utilisateurs:​Tweak-Man]],​ [[wpfr>​easypeasy|EasyPeasy (obsolète)]],​ [[:​jolicloud| Joli OS]] | | Eee PC 1018 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 11.04 | Le bouton d'​alimentation de la connectivité sans fils est fonctionnel mais coupe automatiquement uniquement la connectivité WIFI pour que l’indicateur lumineux d'​alimentation de la connectivité sans fils s'​éteigne il faut désactiver le Bluetooth grâce à l'​applet gnome-bluetooth. Le Bouton "Asus Express Gate" n'est plus fonctionnel. Il est considéré comme le bouton d'​alimentation. Pour augmenter la quantité de mémoire vive et passer à 2 Gio il est nécessaire de flasher le bios, opération qui est facilement réalisable avec l'​utilitaire intégré au bios mais celui-ci ne reconnaît pas les clef USB quel-que-soit le formatage. La solution est d'​utiliser un lecteur cd externe. Attention : le flashage du bios est une manipulation risqué et il n'est pas exclu de rendre ainsi la machine inutilisable.\\ Un gain de 30 mn de fonctionnement sur batterie est obtenu en ôtant une barre sur deux à grille de protection de la sortie du ventilateur (sur le flanc gauche) ce qui permet un refroidissement plus efficace mais une augmentation du bruit (manipulation a effectuer a vos risques et périls bien sûr). [[:​utilisateurs:​upRIlIon]],​ [[:​utilisateurs:​Tweak-Man]],​ [[wpfr>​easypeasy|EasyPeasy (obsolète)]],​ [[:​jolicloud| Joli OS]] |
Ligne 147: Ligne 154:
 | Eee PC 1025_EC | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} {{:​icons:​ok_32.png|32 bits}} | **[[:​precise|12.04]]** | Ubuntu **[[:​precise|12.04]]** LTS : voyant du wifi reste toujours allumé, pilote propriétaire du cpu ne s'​installe pas, sorties son et hdmi non testée | | Eee PC 1025_EC | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} {{:​icons:​ok_32.png|32 bits}} | **[[:​precise|12.04]]** | Ubuntu **[[:​precise|12.04]]** LTS : voyant du wifi reste toujours allumé, pilote propriétaire du cpu ne s'​installe pas, sorties son et hdmi non testée |
 | [[:​asus_eee_pc_1101|Eee PC 1101]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** 15.04 | Driver de carte 3D [[Poulsbo]] non reconnue. **Pour la résolution des problèmes**,​ consultez la documentation associée à ce modèle | | [[:​asus_eee_pc_1101|Eee PC 1101]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** 15.04 | Driver de carte 3D [[Poulsbo]] non reconnue. **Pour la résolution des problèmes**,​ consultez la documentation associée à ce modèle |
-| [[:​asus_eee_pc_1201|Eee PC 1201]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 |**Pour la résolution des problèmes**,​ consultez la documentation associée à ce modèle ​|+| Eee PC 1201 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 14.04 | Pour résoudre problème d'​Ethernet:​ dans [[Grub-pc]] <​file>​GRUB_CMDLINE_LINUX="​pci=nomsi"</​file> ​|
 | Eee PC 1215n | {{:​icons:​ok_64.png|64 bits}}| 11.10 | Lan et Wifi réglés grâce à [[http://​4mhz.de/​debian1215n.html|la page de Tim]] / pour moi tout est Ok. Pour les touches fn du rétro-éclairage voir cette [[:​retro-eclairage#​Modification de Grub|page]]. Pour corriger divers problème tels par exemple l'​absence de réponse des touches multimédia ou le mauvais support de quantités de RAM supérieures à 3GB, il est possible de mettre à jour le bios. Pour effectuer la mise à jour du bios, consultez le tutoriel sur l'​[[:​tutoriel:​activer_le_bootboster_des_asus_eee_pc|activation du bootboster]] **rubrique mise à jour du bios**. Vous pouvez également consultez un [[http://​users.skynet.be/​linux-rixensart/​1_suite.html#​fn|blog Belge sur le Eee PC 1201]] |  ​ | Eee PC 1215n | {{:​icons:​ok_64.png|64 bits}}| 11.10 | Lan et Wifi réglés grâce à [[http://​4mhz.de/​debian1215n.html|la page de Tim]] / pour moi tout est Ok. Pour les touches fn du rétro-éclairage voir cette [[:​retro-eclairage#​Modification de Grub|page]]. Pour corriger divers problème tels par exemple l'​absence de réponse des touches multimédia ou le mauvais support de quantités de RAM supérieures à 3GB, il est possible de mettre à jour le bios. Pour effectuer la mise à jour du bios, consultez le tutoriel sur l'​[[:​tutoriel:​activer_le_bootboster_des_asus_eee_pc|activation du bootboster]] **rubrique mise à jour du bios**. Vous pouvez également consultez un [[http://​users.skynet.be/​linux-rixensart/​1_suite.html#​fn|blog Belge sur le Eee PC 1201]] |  ​
-| Eee PC 1215b | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | En cas de dual-boot, Windows peut laisser l'​ordinateur avec le wifi désactivé. Il faut passer par l'​écran de configuration du bios pour le ré-activer. Pour installer Ubuntu à côté de Windows sur les eeepc EFI, il y a quelques difficultés : Le BIOS boote par défaut sur le disque dur en mode BIOS classique (formaté en msdos), mais sur les clés USB et cartes SD bootables en mode UEFI (nouveau BIOS). Il est donc nécessaire de démarrer sur la clé en mode BIOS. Voir la page [[:uefi]] et la page [[:​tutoriel:​modifier_ordre_amorcage_du_bios|sur comment modifier l'​ordre d'​amorçage du bios]]. Il est possible de récupérer le profil de ce portable sur le site de [[http://​www.notebookcheck.biz/​uploads/​tx_nbc2/​Asus_EeePC_1215B_HSD121PHW1_1366x768_glare.icc|notebookcheck.biz]] Le fichier est à recopier dans **/​usr/​share/​color/​icc** et il sera utilisable par les logiciels reconnaissant des profils (Scribus, etc). Le profil est listé sous le nom "​Monitor_01.06.2011_1"​. |+| Eee PC 1215b | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | En cas de dual-boot, Windows peut laisser l'​ordinateur avec le wifi désactivé. Il faut passer par l'​écran de configuration du bios pour le ré-activer. Pour installer Ubuntu à côté de Windows sur les eeepc EFI, il y a quelques difficultés : Le BIOS boote par défaut sur le disque dur en mode BIOS classique (formaté en msdos), mais sur les clés USB et cartes SD bootables en mode UEFI (nouveau BIOS). Il est donc nécessaire de démarrer sur la clé en mode BIOS. Voir la page [[:uefi]] et la page [[:​tutoriel:​modifier_ordre_amorcage_du_bios|sur comment modifier l'​ordre d'​amorçage du bios]]. Il est possible de récupérer le profil de ce portable sur le site de [[https://​www.notebookcheck.biz/​uploads/​tx_nbc2/​Asus_EeePC_1215B_HSD121PHW1_1366x768_glare.icc|notebookcheck.biz]] Le fichier est à recopier dans **/​usr/​share/​color/​icc** et il sera utilisable par les logiciels reconnaissant des profils (Scribus, etc). Le profil est listé sous le nom "​Monitor_01.06.2011_1"​. |
 | Eee PC X101CH | {{:​icons:​ok_32.png|32 bits}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04 | # Haut-Parleur KO mais Écouteurs OK # Microphone KO # Lecture vidéo saccadée... # Suivez mes instructions en anglais pour résoudre TOUS les problèmes: [[https://​forums.linuxmint.com/​viewtopic.php?​f=42&​t=261881|Asus Eee Pc X101ch and Intel Atom: Start With Linux Mint Mate!]] | | Eee PC X101CH | {{:​icons:​ok_32.png|32 bits}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04 | # Haut-Parleur KO mais Écouteurs OK # Microphone KO # Lecture vidéo saccadée... # Suivez mes instructions en anglais pour résoudre TOUS les problèmes: [[https://​forums.linuxmint.com/​viewtopic.php?​f=42&​t=261881|Asus Eee Pc X101ch and Intel Atom: Start With Linux Mint Mate!]] |
 | Eee TOP et1602 | {{:​icons:​edit-clear.png?​32|Information obsolète}} | 9.04 |**Pour la résolution des problèmes**,​ voir la page des [[evdev|écran tactile]]. | Eee TOP et1602 | {{:​icons:​edit-clear.png?​32|Information obsolète}} | 9.04 |**Pour la résolution des problèmes**,​ voir la page des [[evdev|écran tactile]].
 | eee top et2002 | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{:​icons:​ok_64.png|64 bits}} | 9.04 | - | | eee top et2002 | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{:​icons:​ok_64.png|64 bits}} | 9.04 | - |
-| [[:​asus_eee_pc_t101mt|Eee PC T101MT]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​trusty|14.04]]** ​16.04 | Si écran noir durant l'​installation,​ ajouter nomodeset aux [[:​kernel#​Modifier les paramètres du noyau pour une session-live|options de démarrage]]. Fonctionne comme un Eee PC traditionnel. |+| [[:​asus_eee_pc_t101mt|Eee PC T101MT]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} |  16.04 | Si écran noir durant l'​installation,​ ajouter nomodeset aux [[:​kernel#​Modifier les paramètres du noyau pour une session-live|options de démarrage]]. Fonctionne comme un Eee PC traditionnel. |
 | Eee Slate | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 14.04 |  | | Eee Slate | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 14.04 |  |
  
Ligne 159: Ligne 166:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| F200MA-BING-KX376B | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple d'​installation de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1658111|cedric94230]] : Windows 8.1 BING préinstallé a été viré de l'​ordi. Installation en mode EFI de Lubuntu **[[:​trusty|14.04]]** 64 bits  |+| F200MA-BING-KX376B | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple d'​installation de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1658111|cedric94230]] : Windows 8.1 BING préinstallé a été viré de l'​ordi. Installation en mode EFI de Lubuntu **[[:​trusty|14.04]]** 64 bits  |
 | F301A | {{:​icons:​ok_64.png|64 bits}} | 12.10 |  Windows 8 pré-installé. Exemple d'​installation de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=12997121#​p12997121|flocki]] ​  | | F301A | {{:​icons:​ok_64.png|64 bits}} | 12.10 |  Windows 8 pré-installé. Exemple d'​installation de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=12997121#​p12997121|flocki]] ​  |
 | F3JA | {{:​icons:​ok_32.png|32 bits}} | 9.10 |  | | F3JA | {{:​icons:​ok_32.png|32 bits}} | 9.10 |  |
Ligne 184: Ligne 191:
 | F6A | {{:​icons:​ok_32.png|32 bits}} | 10.04 |  | | F6A | {{:​icons:​ok_32.png|32 bits}} | 10.04 |  |
 | F6V | ? | ? | bluetooth ok | | F6V | ? | ? | bluetooth ok |
-| F751LDV-TY354H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.2 64 bits en dual-boot avec Windows 8.1 préinstallé (Secure Boot désactivé) : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1811741|post de ludique]] |+| F751LDV-TY354H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.2 64 bits en dual-boot avec Windows 8.1 préinstallé (Secure Boot désactivé) : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1811741|post de ludique]] |
 | F75A | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** |  | | F75A | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** |  |
-| F75VC-TY178H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** en dual-boot avec Windows 8 pré-installé (Secure Boot désactivé) : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1585951|post de gershon09]] |+| F75VC-TY178H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** en dual-boot avec Windows 8 pré-installé (Secure Boot désactivé) : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1585951|post de gershon09]] |
 | F7E | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | microphone, [[:​syntek|webcam]] ​ | | F7E | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | microphone, [[:​syntek|webcam]] ​ |
 | F7F | {{:​icons:​ok_32.png|32 bits}} ​ | 11.04 | [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=1731016#​p1731016|audio]],​ [[:​syntek|webcam]] - Totalement fonctionnel out of the box sur Oneiric 11.04 mais ne pas brancher le réseau pendant l'​installation,​ sinon elle bloque à 85% | | F7F | {{:​icons:​ok_32.png|32 bits}} ​ | 11.04 | [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=1731016#​p1731016|audio]],​ [[:​syntek|webcam]] - Totalement fonctionnel out of the box sur Oneiric 11.04 mais ne pas brancher le réseau pendant l'​installation,​ sinon elle bloque à 85% |
Ligne 205: Ligne 212:
 | FS8N | {{:​icons:​ok_32.png|32 bits}} | 8.10 |  | | FS8N | {{:​icons:​ok_32.png|32 bits}} | 8.10 |  |
 | FX504-GE | {{:​icons:​ok_64.png|64 bits}} | **[[:​artful|19.04]]** | Installation en mode EFI de Ubuntu 19.04 64 bits seul dans l'ordi (ce modèle est livré sans OS) | | FX504-GE | {{:​icons:​ok_64.png|64 bits}} | **[[:​artful|19.04]]** | Installation en mode EFI de Ubuntu 19.04 64 bits seul dans l'ordi (ce modèle est livré sans OS) |
 +| FX550VX-DM174D | {{:​icons:​ok_64.png|64 bits}} | **[[:​artful|14.04]]** |  |
 | FX553V | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu 16.04 64 bits seul dans l'ordi (ce modèle est livré avec Windows 10) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2022412|Neyres]] | | FX553V | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu 16.04 64 bits seul dans l'ordi (ce modèle est livré avec Windows 10) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2022412|Neyres]] |
 | FX753VD-GC261 | {{:​icons:​ok_64.png|64 bits}} | **[[:​artful|17.10]]** | Installation en mode EFI de Ubuntu 17.10 64 bits seul dans l'ordi (ce modèle est livré sans OS) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020890|m.s0]] | | FX753VD-GC261 | {{:​icons:​ok_64.png|64 bits}} | **[[:​artful|17.10]]** | Installation en mode EFI de Ubuntu 17.10 64 bits seul dans l'ordi (ce modèle est livré sans OS) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020890|m.s0]] |
Ligne 216: Ligne 224:
 | G1S-AK092C | {{:​icons:​ok_32.png|32 bits}} | 10.04 | - |  | G1S-AK092C | {{:​icons:​ok_32.png|32 bits}} | 10.04 | - | 
 | G2PC | - | - | Configuration des Leds sur les cotés de l'​écran dans le fichier ''/​sys/​class/​leds/​asus::​gaming/​brightness''​ | | G2PC | - | - | Configuration des Leds sur les cotés de l'​écran dans le fichier ''/​sys/​class/​leds/​asus::​gaming/​brightness''​ |
-| G2S-7R023C | - | - | - | +| G2S-7R023C | - | - | - |
 | G501VW | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04 | Installation en mode EFI de 16.04 64 bits en dual-boot avec Windows 10 préinstallé. Options à passer au noyau "​acpi_osi= ​ acpi_backlight=native"​ pour que les touches de fonction de retroeclairage et mode avion soient fonctionnelles : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1990006|post tiskiffer]] | | G501VW | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04 | Installation en mode EFI de 16.04 64 bits en dual-boot avec Windows 10 préinstallé. Options à passer au noyau "​acpi_osi= ​ acpi_backlight=native"​ pour que les touches de fonction de retroeclairage et mode avion soient fonctionnelles : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1990006|post tiskiffer]] |
 | G50V | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 | Il est nécessaire de modifier un réglage dans le bios pour que Ubuntu détecte bien votre disque dur lors de l'​installation. Lors du démarrage, il faut appuyer sur la touche **F2** dans l'​onglet **Advanced**,​ repérez **IDE Configuration** et appuyez sur la touche entrée, sélectionnez ensuite **SATA Operation Mode** et remplacez **Enhanced** par **Compatible**. Cette modification dans le BIOS empêchera tout système d'​exploitation Microsoft Windows préalablement installé de démarrer. Il faudra donc une fois l'​installation de Ubuntu terminée, opter pour le mode **Enhanced**. Windows et Ubuntu fonctionneront alors normalement. Audio voir [[audio_intel_hda|ici]] | | G50V | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 | Il est nécessaire de modifier un réglage dans le bios pour que Ubuntu détecte bien votre disque dur lors de l'​installation. Lors du démarrage, il faut appuyer sur la touche **F2** dans l'​onglet **Advanced**,​ repérez **IDE Configuration** et appuyez sur la touche entrée, sélectionnez ensuite **SATA Operation Mode** et remplacez **Enhanced** par **Compatible**. Cette modification dans le BIOS empêchera tout système d'​exploitation Microsoft Windows préalablement installé de démarrer. Il faudra donc une fois l'​installation de Ubuntu terminée, opter pour le mode **Enhanced**. Windows et Ubuntu fonctionneront alors normalement. Audio voir [[audio_intel_hda|ici]] |
Ligne 235: Ligne 243:
 | [[:​asus_g73s|G73J/​G73S/​G73SW]] | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​trusty|14.04]]** | [[:​asus_g73s|Résolutions des problèmes du Asus G73S/​G73SW]] | | [[:​asus_g73s|G73J/​G73S/​G73SW]] | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​trusty|14.04]]** | [[:​asus_g73s|Résolutions des problèmes du Asus G73S/​G73SW]] |
 | [[:​asus_g74sx|G74Sx]] | {{:​icons:​ok_64.png|64 bits}}| **[[:​precise|12.04]]** **[[:​trusty|14.04]]** et 14.10 | Pour éviter que la luminosité soit à fond au démarrage, reportez-vous aux indications [[#​Retro-eclairage|en début de page]] utilisateur [[:​utilisateurs:​binnette]] | | [[:​asus_g74sx|G74Sx]] | {{:​icons:​ok_64.png|64 bits}}| **[[:​precise|12.04]]** **[[:​trusty|14.04]]** et 14.10 | Pour éviter que la luminosité soit à fond au démarrage, reportez-vous aux indications [[#​Retro-eclairage|en début de page]] utilisateur [[:​utilisateurs:​binnette]] |
-| G741JM-T4056H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** 64 bits (version "de base" avec noyau 3.13.0-x) en dual-boot avec Windows 8 préinstallé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1911391|christien]]|+| G741JM-T4056H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** 64 bits (version "de base" avec noyau 3.13.0-x) en dual-boot avec Windows 8 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1911391|christien]]|
 | G741JM-T4045H (G771JM) | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** **[[:​xenial|16.04]]** | Portable donné G771JM sous lshw. Installations en mode non-EFI de Ubuntu (version internationale 64bits) & Ubuntu-Studio **[[:​trusty|14.04]]** puis **[[:​xenial|16.04]]** (64bits, version "de base"​),​ avec GNOME-session-flashback et open-box. Le réglage de luminosité de l'​écran (Fn+f5/f6) ne fonctionne pas. Il a fallu déverrouiller le BIOS, selon tutos du forum mais il fonctionne parfaitement. **[[:​xenial|16.04]]** gère sans problème la prise en charge des cartes graphiques "​mixtes",​ j'​avais rencontré pas mal de galères sous **[[:​trusty|14.04]]** | | G741JM-T4045H (G771JM) | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** **[[:​xenial|16.04]]** | Portable donné G771JM sous lshw. Installations en mode non-EFI de Ubuntu (version internationale 64bits) & Ubuntu-Studio **[[:​trusty|14.04]]** puis **[[:​xenial|16.04]]** (64bits, version "de base"​),​ avec GNOME-session-flashback et open-box. Le réglage de luminosité de l'​écran (Fn+f5/f6) ne fonctionne pas. Il a fallu déverrouiller le BIOS, selon tutos du forum mais il fonctionne parfaitement. **[[:​xenial|16.04]]** gère sans problème la prise en charge des cartes graphiques "​mixtes",​ j'​avais rencontré pas mal de galères sous **[[:​trusty|14.04]]** |
 | G75VW | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** et 13.10 | [[http://​www.forum-des-portables-asus.fr/​forums/​threads/​sous-linux-ubuntu-12-04-raid-pilotes-nvidia-skyrim.6828/​page-2#​post-58467|Problème résolu en partie : voir derniers posts de ce fil de discussion]]. Pour le modèle G75VW-T2018V,​ avec Win7 pré-installé UEFI, il convient d'​installer Ubuntu **[[:​precise|12.04]]** (ou version ultérieure) en mode UEFI sur partitions GPT : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11696471#​p11696471|post will4211]]. [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11769361|Concernant la luminosité]] - Dual-boot Ubuntu 13.10/​Windows 7 : exemple d'​installation par aubaisien [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15358231#​p15358231|ici]] ​ | | G75VW | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** et 13.10 | [[http://​www.forum-des-portables-asus.fr/​forums/​threads/​sous-linux-ubuntu-12-04-raid-pilotes-nvidia-skyrim.6828/​page-2#​post-58467|Problème résolu en partie : voir derniers posts de ce fil de discussion]]. Pour le modèle G75VW-T2018V,​ avec Win7 pré-installé UEFI, il convient d'​installer Ubuntu **[[:​precise|12.04]]** (ou version ultérieure) en mode UEFI sur partitions GPT : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11696471#​p11696471|post will4211]]. [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11769361|Concernant la luminosité]] - Dual-boot Ubuntu 13.10/​Windows 7 : exemple d'​installation par aubaisien [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15358231#​p15358231|ici]] ​ |
 | G75VX-T4113H |  {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | Installation de Ubuntu **[[:​precise|12.04]]**.3 en mode UEFI en dual-boot avec Windows 8 préinstallé ("​Secure Boot" désactivé) :  voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=14545361#​p14545361|post byakuya44190]] | | G75VX-T4113H |  {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | Installation de Ubuntu **[[:​precise|12.04]]**.3 en mode UEFI en dual-boot avec Windows 8 préinstallé ("​Secure Boot" désactivé) :  voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=14545361#​p14545361|post byakuya44190]] |
-| G750JX-T4044H |{{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]**| Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 8.1 préinstallé :  voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1700181|post Fautmarquerquoi]] | +| G750JX-T4044H |{{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]**| Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 8.1 préinstallé :  voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1700181|post Fautmarquerquoi]] | 
-| G750JX-T4145H | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Installation en mode EFI de Ubuntu 15.04 64 bits en dual-boot avec Windows 8.1 préinstallé :  voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1829671|post thib3113]], problème avec la luminosité du clavier lors de la fermeture de l'​écran (necessite une modification après ouverture pour s'​allumer) |+| G750JX-T4145H | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Installation en mode EFI de Ubuntu 15.04 64 bits en dual-boot avec Windows 8.1 préinstallé :  voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1829671|post thib3113]], problème avec la luminosité du clavier lors de la fermeture de l'​écran (necessite une modification après ouverture pour s'​allumer) |
 | G751JT-T7016H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Installation en mode CSM de Ubuntu 14.10 64 bits en dual-boot avec Windows 8.1 préinstallé. Impossible de régler la luminosité de l'​écran avec les touches du clavier (toujours au max). Problèmes de mise en veille / sortie de veille. Pilote vidéo indisponible dans les dépôts de base (01/2015), mais fonctionne à l'aide du PPA xorg-edgers/​ppa. La prise casque ne redirige pas le son. | | G751JT-T7016H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Installation en mode CSM de Ubuntu 14.10 64 bits en dual-boot avec Windows 8.1 préinstallé. Impossible de régler la luminosité de l'​écran avec les touches du clavier (toujours au max). Problèmes de mise en veille / sortie de veille. Pilote vidéo indisponible dans les dépôts de base (01/2015), mais fonctionne à l'aide du PPA xorg-edgers/​ppa. La prise casque ne redirige pas le son. |
  
Ligne 258: Ligne 266:
 | STRIX GL703VD | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**| Installation en mode EFI de Xubuntu 16.04.3 64 bits en dual-boot avec Windows 10 préinstallé. Secure Boot désactivé. Utilisation du pilote NVIDIA : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2021106|goethe'​s]] ​ | | STRIX GL703VD | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**| Installation en mode EFI de Xubuntu 16.04.3 64 bits en dual-boot avec Windows 10 préinstallé. Secure Boot désactivé. Utilisation du pilote NVIDIA : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2021106|goethe'​s]] ​ |
 | STRIX GL703VD-GC007X | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**|Installation en mode EFI de Ubuntu 16.04.3 64 bits en dual-boot avec Windows 10 (ce modèle est préinstallé FreeDOS, un OS minimaliste qui s'est fait virer), Secure Boot désactivé : voir  post[[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2021575| Stoosh]] ​ | | STRIX GL703VD-GC007X | {{:​icons:​ok_64.png|64 bits}} |**[[:​xenial|16.04]]**|Installation en mode EFI de Ubuntu 16.04.3 64 bits en dual-boot avec Windows 10 (ce modèle est préinstallé FreeDOS, un OS minimaliste qui s'est fait virer), Secure Boot désactivé : voir  post[[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2021575| Stoosh]] ​ |
-| GL704GM-EV013T | {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**|Installation en mode EFI de Xubuntu 18.04.2 64 bits en dual-boot avec Xubuntu 18.10 préinstallé (Windows 10 installé d'​origine s'est fait virer), Secure Boot désactivé : voir  post[[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2042173|loutch]] ​ |+| GL704GM-EV013T | {{:​icons:​ok_64.png|64 bits}} |**[[:​bionic|18.04]]**|Installation en mode EFI de Xubuntu 18.04.2 64 bits en dual-boot avec Xubuntu 18.10 préinstallé (Windows 10 installé d'​origine s'est fait virer), Secure Boot désactivé : voir  post[[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2042173|loutch]] ​ |
 | GL752VW-T4064D | {{:​icons:​ok_64.png|64 bits}} |16.04.1| Installation en mode EFI de Ubuntu 16.04.1 64 bits en dual-boot avec Windows 10 sur SSD partitionné. Secure Boot + fast boot désactivés,​ démarrage rapide de Windows 10 désactivé.ATTENTION!!! Ajout de l'​option acpi=off pour lancer le live 16.04.1 puis install et ajout des pilotes NVIDIA propriétaires au redémarrage,​ penser à remettre le flag acpi=on dans le grub.cfg (sinon pas d'​extinction,​ d'​arrêt,​ de redémarrage et de touchpad), tout fonctionne démarre comme une flèche. 8-) 8-) ;-) Igor B.  | | GL752VW-T4064D | {{:​icons:​ok_64.png|64 bits}} |16.04.1| Installation en mode EFI de Ubuntu 16.04.1 64 bits en dual-boot avec Windows 10 sur SSD partitionné. Secure Boot + fast boot désactivés,​ démarrage rapide de Windows 10 désactivé.ATTENTION!!! Ajout de l'​option acpi=off pour lancer le live 16.04.1 puis install et ajout des pilotes NVIDIA propriétaires au redémarrage,​ penser à remettre le flag acpi=on dans le grub.cfg (sinon pas d'​extinction,​ d'​arrêt,​ de redémarrage et de touchpad), tout fonctionne démarre comme une flèche. 8-) 8-) ;-) Igor B.  |
 | GL752VW-T4416T | {{:​icons:​ok_64.png|64 bits}} |15.10| Installation en mode EFI de Ubuntu 15.10 64 bits en dual-boot avec Windows 10 préinstallé sur SSD partitionné. Secure Boot + fast boot désactivés,​ démarrage rapide de Windows 10 désactivé. Tout est ok. (testé également avec les 14.04 et 16.04, impossible de lancer une livesession ou d'​installer,​ il semblerait que ce soit une question d'​intégration de pilotes proprios qui sont présents dans la 15.10)| | GL752VW-T4416T | {{:​icons:​ok_64.png|64 bits}} |15.10| Installation en mode EFI de Ubuntu 15.10 64 bits en dual-boot avec Windows 10 préinstallé sur SSD partitionné. Secure Boot + fast boot désactivés,​ démarrage rapide de Windows 10 désactivé. Tout est ok. (testé également avec les 14.04 et 16.04, impossible de lancer une livesession ou d'​installer,​ il semblerait que ce soit une question d'​intégration de pilotes proprios qui sont présents dans la 15.10)|
Ligne 271: Ligne 279:
 | K50IJ-SX080E | {{:​icons:​ok_64.png|64 bits}} |18.04 | image webcam inversée (résolu avec [[:v4l1]]) | | K50IJ-SX080E | {{:​icons:​ok_64.png|64 bits}} |18.04 | image webcam inversée (résolu avec [[:v4l1]]) |
 | K50IJ-SX264V | {{:​icons:​ok_64.png|64 bits}} | 18.04 | image webcam inversée (résolu avec [[:v4l1]]) | | K50IJ-SX264V | {{:​icons:​ok_64.png|64 bits}} | 18.04 | image webcam inversée (résolu avec [[:v4l1]]) |
-| K50IN | {{wiki:​modeles:​laptop_work.png| Fonctionne après config}} | 10.10 | Démarrer avec [[:​kernel#​Paramètres du noyau|les options nomodeset xforcevesa]]. Voir  [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=393246|ici]] |+| K50IN | {{wiki:​modeles:​laptop_work.png| Fonctionne après config}} | 10.10 | Démarrer avec [[:​kernel#​Paramètres du noyau|les options nomodeset xforcevesa]]. Voir  [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=393246|ici]] |
 | K52J Series | {{:​icons:​ok_64.png|64 bits}} | 12.10 | Installer bumblebee pour utiliser sa carte nvidia optimus| | K52J Series | {{:​icons:​ok_64.png|64 bits}} | 12.10 | Installer bumblebee pour utiliser sa carte nvidia optimus|
 | K52Je | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​xenial|18.04]]** | Fonctionne parfaitement,​ ne pas utiliser les pilotes propiétaires AMD car écran noir. Image Webcam inversé (Cheese permet de contourner le problème (pas skype)) | | K52Je | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​xenial|18.04]]** | Fonctionne parfaitement,​ ne pas utiliser les pilotes propiétaires AMD car écran noir. Image Webcam inversé (Cheese permet de contourner le problème (pas skype)) |
-| K52JK-SX012V | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10 | le casque ne coupe pas les enceintes, image webcam inversée (résolu avec [[:​cheese]]),​ touchpad reconnu comme une souris, touches touches multimédia \\ [[http://​ubuntuforums.org/​showthread.php?​p=9162799|résolution des problèmes]] **(en)** | +| K52JK-SX012V | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10 | le casque ne coupe pas les enceintes, image webcam inversée (résolu avec [[:​cheese]]),​ touchpad reconnu comme une souris, touches touches multimédia \\ [[https://​ubuntuforums.org/​showthread.php?​p=9162799|résolution des problèmes]] **(en)** | 
-| K52JR-SX071V | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10 | [[http://​ubuntuforums.org/​showthread.php?​t=1043568&​page=14|le casque ne coupe pas les enceintes]] **(en)** |+| K52JR-SX071V | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10 | [[https://​ubuntuforums.org/​showthread.php?​t=1043568&​page=14|le casque ne coupe pas les enceintes]] **(en)** |
 | [[:​asus_k52jt|K52JT]] |{{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** 12.10 | Suivre cette [[:​asus_k52jt#​webcam|partie]] sur la page dédiée au modèle ​ - L'​installation du pilote graphique AMD est recommandé pour une meilleur expérience.| | [[:​asus_k52jt|K52JT]] |{{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** 12.10 | Suivre cette [[:​asus_k52jt#​webcam|partie]] sur la page dédiée au modèle ​ - L'​installation du pilote graphique AMD est recommandé pour une meilleur expérience.|
 | K53E | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 12.10 | Tout est OK au 1er démarrage, Carte graphique, Son , Wifi, Bluetooth, Webcam, Touchpad , lecteur de carte , Raccourcis multimédia .....| | K53E | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 12.10 | Tout est OK au 1er démarrage, Carte graphique, Son , Wifi, Bluetooth, Webcam, Touchpad , lecteur de carte , Raccourcis multimédia .....|
 | K53SC | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Aucun problème majeur détecté. Seules certaines touches spéciales ne sont pas comprises par Unity (notamment les touches "​Augmenter / Réduire la luminosité"​ qui, bien que fonctionnant,​ n'​appliquent pas la modification au niveau indiqué par Unity - même après redéfinition des raccourcis) \\ **[[:​trusty|14.04]]** 64bits : Nvidia Prime OK ; Ajouter **echo disable > /​sys/​firmware/​acpi/​interrupts/​gpe06** au fichier /​etc/​rc.local [[https://​bugs.debian.org/​cgi-bin/​bugreport.cgi?​bug=688350|bug 688350]] | | K53SC | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Aucun problème majeur détecté. Seules certaines touches spéciales ne sont pas comprises par Unity (notamment les touches "​Augmenter / Réduire la luminosité"​ qui, bien que fonctionnant,​ n'​appliquent pas la modification au niveau indiqué par Unity - même après redéfinition des raccourcis) \\ **[[:​trusty|14.04]]** 64bits : Nvidia Prime OK ; Ajouter **echo disable > /​sys/​firmware/​acpi/​interrupts/​gpe06** au fichier /​etc/​rc.local [[https://​bugs.debian.org/​cgi-bin/​bugreport.cgi?​bug=688350|bug 688350]] |
 | K53SK | {{:​icons:​ok_64.png|64 bits}} | **[[:​saucy|12.10]]** |   | | K53SK | {{:​icons:​ok_64.png|64 bits}} | **[[:​saucy|12.10]]** |   |
-| K551LN-XO551H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Install en mode EFI de Xubuntu 15.04 64 bits en dual-boot avec Windows 8.1 préinstallé ; astuce détaillée pour installer Ubuntu sur le SSD après avoir désactivé le cache Windows : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1827921|post Emmapic]]|+| K551LN-XO551H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Install en mode EFI de Xubuntu 15.04 64 bits en dual-boot avec Windows 8.1 préinstallé ; astuce détaillée pour installer Ubuntu sur le SSD après avoir désactivé le cache Windows : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1827921|post Emmapic]]|
 | K551LN-XX264H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Install en mode EFI en dual-boot avec Windows 8.1 préinstallé : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19469201#​p19469201|post Dreadid]]| | K551LN-XX264H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Install en mode EFI en dual-boot avec Windows 8.1 préinstallé : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19469201#​p19469201|post Dreadid]]|
 | K55v | {{:​icons:​ok_32.png|32 ​ bits}} | 12.10 | Sous Kubuntu 32Bits,Tout est presque OK au 1er démarrage, Carte graphique, Son, Wifi, Bluetooth, Touchpad ,  Raccourcis multimédia ..... voir pour le lecteur de carte...[[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11427611#​p11427611|post sur le forum]]| | K55v | {{:​icons:​ok_32.png|32 ​ bits}} | 12.10 | Sous Kubuntu 32Bits,Tout est presque OK au 1er démarrage, Carte graphique, Son, Wifi, Bluetooth, Touchpad ,  Raccourcis multimédia ..... voir pour le lecteur de carte...[[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11427611#​p11427611|post sur le forum]]|
-| [[:​asus_k55vd|K55VD]] | {{:​icons:​ok_64.png|64 ​ bits}} | **[[:​trusty|14.04]]** | Aucun problème sous Ubuntu 14.04.3 (en utilisant uniquement la carte graphique Intel) |+| K55VD | {{:​icons:​ok_64.png|64 ​ bits}} | **[[:​trusty|14.04]]** | Aucun problème sous Ubuntu 14.04.3 (en utilisant uniquement la carte graphique Intel) ​
 +| K61ic | {{:​icons:​ok_64.png|64 ​ bits}} | **[[:​focal|20.04]]**| Installation en mode Bios traditionnel de Ubuntu 20.04 : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2060494|STyx2909]] ​|
 | K72DR | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10| [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=3340906#​p3340906|Voir ce post (merci à Titan59 !)]] | | K72DR | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10| [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=3340906#​p3340906|Voir ce post (merci à Titan59 !)]] |
 | K72JK-TY051V | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​precise|12.04]]** | Installation des [[ati|pilotes propriétaires ATI]] nécessaire pour l'​accélération graphique et les effets 3D. | | K72JK-TY051V | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​precise|12.04]]** | Installation des [[ati|pilotes propriétaires ATI]] nécessaire pour l'​accélération graphique et les effets 3D. |
Ligne 291: Ligne 300:
 | K751LJ-TY059H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Install en mode EFI de Ubuntu 16.04.2 en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2011442|Dab Michel]]| | K751LJ-TY059H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Install en mode EFI de Ubuntu 16.04.2 en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2011442|Dab Michel]]|
 | K756UV | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Install en mode Bios (non-EFI) de Ubuntu 16.04.4 64 bits seul dans l'​ordi. Il est nécessaire de modifier dans le "​Bios"​ le mode de sélection SATA pour le passer en AHCI au lieu de "intel RST premium"​ : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2024490|scarf]]| | K756UV | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Install en mode Bios (non-EFI) de Ubuntu 16.04.4 64 bits seul dans l'​ordi. Il est nécessaire de modifier dans le "​Bios"​ le mode de sélection SATA pour le passer en AHCI au lieu de "intel RST premium"​ : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2024490|scarf]]|
 +| K95VM | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Install en mode EFI de Ubuntu 20.04.1 seul dans l'ordi : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2060078|Topazou]]|
  
 ===== L ===== ===== L =====
Ligne 304: Ligne 314:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| M2400 | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 5.10 | lecteur de cartes, [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=34577|touches multimédia]] |+| VivoBook M1502 | {{:​icons:​ok_64.png|64 bits}} | 22.10| install sans souci de Ubuntu 22.10 (modele exact Vivobook S1502IA-EJ045W)| 
 +| VivoBook M1702Q | {{:​icons:​ok_64.png|64 bits}} | 22.04| installation sans souci de Ubuntu 22.04 en dual-boot avec Windows 11 préinstallé après les modifications d'​usage avec Windows | 
 +| M2400 | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 5.10 | lecteur de cartes, [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=34577|touches multimédia]] |
 | M50SV | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | touches multimédia | | M50SV | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | touches multimédia |
 | M50VC | {{:​icons:​edit-clear.png?​32|Information obsolète}}{{:​icons:​ok_32.png|32 bits}} | 9.04| [[:​retro-eclairage#​pour_portable_asus|améliorer la luminosité de l'​écran]] | | M50VC | {{:​icons:​edit-clear.png?​32|Information obsolète}}{{:​icons:​ok_32.png|32 bits}} | 9.04| [[:​retro-eclairage#​pour_portable_asus|améliorer la luminosité de l'​écran]] |
 | M50VM | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | [[http://​ubuntuforums.org/​showthread.php?​p=6589810#​post6589810|audio]] | | M50VM | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | [[http://​ubuntuforums.org/​showthread.php?​p=6589810#​post6589810|audio]] |
 | M50VN | {{:​icons:​ok_64.png|64 bits}} FIXME à confirmer| 11.04 | [[http://​ubuntuforums.org/​showthread.php?​p=6589810#​post6589810|audio]] | | M50VN | {{:​icons:​ok_64.png|64 bits}} FIXME à confirmer| 11.04 | [[http://​ubuntuforums.org/​showthread.php?​p=6589810#​post6589810|audio]] |
 +
 | M51A | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04| [[:​fprint|lecteur d'​empreinte]],​ micro de la webcam, bluetooth ok | | M51A | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04| [[:​fprint|lecteur d'​empreinte]],​ micro de la webcam, bluetooth ok |
-| M51S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04| [[:​fprint|lecteur d'​empreinte]] , bluetooth ok |+| VivoBook M513UA | {{:​icons:​ok_64.png|64 bits}} | 22.04| install sans souci de Ubuntu 22.04 en dual-boot avec Windows 11 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2072590|jojolemerou]] | 
 +| M51S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04| [[:​fprint|lecteur d'​empreinte]] , bluetooth ok 
 | M51SE-AS128C | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | Problème d'​affichage (écran noir) pour l'​installation. A l'​accueil du menu du [[:live cd]], ajouter l'​option :​ ''​mem=2900M''​. Audio fonctionne après l'​ajout dans le fichier **/​etc/​modprobe.d/​alsa-base** de l'​option :​ <​file>​snd-hda-intel model=lenovo</​file>​ , bluetooth ok  | | M51SE-AS128C | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | Problème d'​affichage (écran noir) pour l'​installation. A l'​accueil du menu du [[:live cd]], ajouter l'​option :​ ''​mem=2900M''​. Audio fonctionne après l'​ajout dans le fichier **/​etc/​modprobe.d/​alsa-base** de l'​option :​ <​file>​snd-hda-intel model=lenovo</​file>​ , bluetooth ok  |
-| M51SN | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | [[:​audio_intel_hda|audio]],​ [[:​fprint|lecteur d'​empreinte]],​ [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=147598&​p=2|webcam]] ,bluetooth ok |+| M51SN | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | [[:​audio_intel_hda|audio]],​ [[:​fprint|lecteur d'​empreinte]],​ [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=147598&​p=2|webcam]] ,bluetooth ok |
 | M51TR | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} |8.10 | audio, hdmi, WiFi           ​bluetooth ok | | M51TR | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} |8.10 | audio, hdmi, WiFi           ​bluetooth ok |
 | M51VA | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 11.04 | micro de la webcam ; Saccades avec le pilote propriétaire de la carte graphique dans les film, privilégiez le pilote libre qui ne pose lui aucun souci, bluetooth ok| | M51VA | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 11.04 | micro de la webcam ; Saccades avec le pilote propriétaire de la carte graphique dans les film, privilégiez le pilote libre qui ne pose lui aucun souci, bluetooth ok|
Ligne 332: Ligne 346:
 | N53SN | {{:​icons:​ok_64.png|64 bits}} | 11.04 | Avec la 11.04 64 bits l'​affichage est correct sans installation supplémentaire. La proposition d'​installation des pilotes NVidia entraîne un dysfonctionnement. Les fonctions de mise en veille et hibernation ne fonctionnent pas (impossible de réanimer le PC). Concernant le clavier, l'​utilisation des chiffres en verrouillant le pavé numérique implique de désactiver une option d’accessibilité qui privilégie les mouvements du curseur de la souris. Explication à cette [[http://​ubuntu.5.n6.nabble.com/​Pave-numerique-de-mon-clavier-ne-marche-plus-td768365.html|adresse]]. | | N53SN | {{:​icons:​ok_64.png|64 bits}} | 11.04 | Avec la 11.04 64 bits l'​affichage est correct sans installation supplémentaire. La proposition d'​installation des pilotes NVidia entraîne un dysfonctionnement. Les fonctions de mise en veille et hibernation ne fonctionnent pas (impossible de réanimer le PC). Concernant le clavier, l'​utilisation des chiffres en verrouillant le pavé numérique implique de désactiver une option d’accessibilité qui privilégie les mouvements du curseur de la souris. Explication à cette [[http://​ubuntu.5.n6.nabble.com/​Pave-numerique-de-mon-clavier-ne-marche-plus-td768365.html|adresse]]. |
 | N53SV | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 11.10 |Fonctionne très bien sous Xubuntu 64bits mais nécessite quelques optimisations. Bumblebee permet d'​utiliser le GPU Nvidia. Problèmes à régler: impossible de sortir de la mise en veille/​hibernation réglé après mise à jour. | | N53SV | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 11.10 |Fonctionne très bien sous Xubuntu 64bits mais nécessite quelques optimisations. Bumblebee permet d'​utiliser le GPU Nvidia. Problèmes à régler: impossible de sortir de la mise en veille/​hibernation réglé après mise à jour. |
-| N550JK-CM137H | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | Exemple d'​installation de Ubuntu **[[:​trusty|14.04]]** 64 bits en mode non-EFI sur un SSD (en remplacement du HDD d'​origine) : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1615821|Sboub]] |+| N550JK-CM137H | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | Exemple d'​installation de Ubuntu **[[:​trusty|14.04]]** 64 bits en mode non-EFI sur un SSD (en remplacement du HDD d'​origine) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1615821|Sboub]] |
 | N550JV-CN201H | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | Exemple de dual-boot Kubuntu 13.10/​Windows 8 préinstallé dans ce fil de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15659311#​p15659311|waouh]] | | N550JV-CN201H | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | Exemple de dual-boot Kubuntu 13.10/​Windows 8 préinstallé dans ce fil de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15659311#​p15659311|waouh]] |
 | N55_SF | {{:​icons:​ok_64.png|64 bits}} | 13.10 |Fonctionne très bien. Pour le son voir [[:​audio_intel_hda#​asus|ici]] et pour le caisson de basse[[|ici]]. ​ | | N55_SF | {{:​icons:​ok_64.png|64 bits}} | 13.10 |Fonctionne très bien. Pour le son voir [[:​audio_intel_hda#​asus|ici]] et pour le caisson de basse[[|ici]]. ​ |
 | N552VX-FI019T UHD| {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​cosmic|18.10]]** | D'​abord mettre à jour le bios à la version 300. La version rolling/​cosmic est la seule qui permet de tester dans la bonne résolution les autres plantent. Il faut mettre le driver Nvidia proprio sinon ça ne marche pas: voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2026469|Install sur asus N552VX]] Il se peut que cela soit du à mon écran UHD: voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2026471|Problème écran UHD et 4K]] | | N552VX-FI019T UHD| {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​cosmic|18.10]]** | D'​abord mettre à jour le bios à la version 300. La version rolling/​cosmic est la seule qui permet de tester dans la bonne résolution les autres plantent. Il faut mettre le driver Nvidia proprio sinon ça ne marche pas: voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2026469|Install sur asus N552VX]] Il se peut que cela soit du à mon écran UHD: voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2026471|Problème écran UHD et 4K]] |
-| N552VX-FW134T | {{:​icons:​ok_64.png|64 bits}}| **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu 16.04.1 64 bits seul dans l'ordi (Windows 10 préinstallé a été viré) : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1997027|Surfait]] |+| N552VX-FW134T | {{:​icons:​ok_64.png|64 bits}}| **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu 16.04.1 64 bits seul dans l'ordi (Windows 10 préinstallé a été viré) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1997027|Surfait]] |
 | N552VX-IT165 | {{:​icons:​ok_64.png|64 bits}}| **[[:​xenial|16.04]]** | Testé avec ElementaryOS Loki 0.4, necessite le déverouillage du mode de démarrage sécurisé, l'​installation en mode EFI et l'​installation de prime et du pilote nvidia(361). ​ Pour ubuntu 14.04.5, 16.04.1, EOs Freya et Loki il faut au démarrage de la clé usb modifier les paramètres Grub en ajoutant acpi =off | | N552VX-IT165 | {{:​icons:​ok_64.png|64 bits}}| **[[:​xenial|16.04]]** | Testé avec ElementaryOS Loki 0.4, necessite le déverouillage du mode de démarrage sécurisé, l'​installation en mode EFI et l'​installation de prime et du pilote nvidia(361). ​ Pour ubuntu 14.04.5, 16.04.1, EOs Freya et Loki il faut au démarrage de la clé usb modifier les paramètres Grub en ajoutant acpi =off |
 | N56VJ-S3005H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** |Installation en mode non-EFI de Ubuntu **[[:​trusty|14.04]]**.1 en dual-boot avec Windows 7 : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17753491#​p17753491|post MiniTux90]] | | N56VJ-S3005H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** |Installation en mode non-EFI de Ubuntu **[[:​trusty|14.04]]**.1 en dual-boot avec Windows 7 : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17753491#​p17753491|post MiniTux90]] |
 | N56VM | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** | Pour un dual-boot, la solution la plus "​propre"​ consiste à formater totalement votre disque dur, y supprimer l'​ensemble des partitions, et en redéfinissant la table de partition en ms-dos (tout ceci pouvant être fait grâce à GParted lancé depuis un CD ou une clé USB live Ubuntu). Pour le caisson de basse voir [[:​son_avances#​caisson de basse|ici]] **[[:​precise|12.04]]** et 13.04   | | N56VM | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** | Pour un dual-boot, la solution la plus "​propre"​ consiste à formater totalement votre disque dur, y supprimer l'​ensemble des partitions, et en redéfinissant la table de partition en ms-dos (tout ceci pouvant être fait grâce à GParted lancé depuis un CD ou une clé USB live Ubuntu). Pour le caisson de basse voir [[:​son_avances#​caisson de basse|ici]] **[[:​precise|12.04]]** et 13.04   |
-| N56VZ | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 12.10 | Exemple de dual-boot 12.10 avec Win 7 : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1194441|post throdin]] ​ | +| N56VZ | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 12.10 | Exemple de dual-boot 12.10 avec Win 7 : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1194441|post throdin]] ​ | 
-| N580GD-E4351T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2031778|DarkArshyn]]|+| N580GD-E4351T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2031778|DarkArshyn]]|
 | N61VG | {{:​icons:​ok_32.png|32 bits}} | 10.10 | version 10.11 Nickel, avec Cairo-doc gl en plus | | N61VG | {{:​icons:​ok_32.png|32 bits}} | 10.10 | version 10.11 Nickel, avec Cairo-doc gl en plus |
 | N61VN | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​precise|12.04]]** | Fonctionne aussi avec Ubuntu 12.10 | | N61VN | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​precise|12.04]]** | Fonctionne aussi avec Ubuntu 12.10 |
Ligne 354: Ligne 368:
 | N75S |{{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​xenial|16.04]]** | Fonctionne très bien. Pour que le pavé numérique fonctionne. Désactiver Touches de la souris (contrôle du pointeur à l'aide du pavé numérique) dans Paramètres système > accés universel > Pointage et clic souris. | | N75S |{{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​xenial|16.04]]** | Fonctionne très bien. Pour que le pavé numérique fonctionne. Désactiver Touches de la souris (contrôle du pointeur à l'aide du pavé numérique) dans Paramètres système > accés universel > Pointage et clic souris. |
 | N750JV | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | fonctionne correctement sur ubuntu **[[:​trusty|14.04]]**| | N750JV | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | fonctionne correctement sur ubuntu **[[:​trusty|14.04]]**|
-| N750JV-T4169H | {{:​icons:​ok_64.png|64 bits}} | 15.10 | Ubuntu **[[:​trusty|14.04]]**.1 64 bits installé en mode EFI en dual-boot avec Windows 8 préinstallé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1665401|501darts]] \\ Ubuntu 15.10 64 bits installé en mode EFI en dual-boot avec Windows 10 (migré depuis Windows 8.1) : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1939721|byllle]] | +| N750JV-T4169H | {{:​icons:​ok_64.png|64 bits}} | 15.10 | Ubuntu **[[:​trusty|14.04]]**.1 64 bits installé en mode EFI en dual-boot avec Windows 8 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1665401|501darts]] \\ Ubuntu 15.10 64 bits installé en mode EFI en dual-boot avec Windows 10 (migré depuis Windows 8.1) : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1939721|byllle]] | 
 | N752V| {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|17.04]]** | fonctionne correctement sur ubuntu studio sauf BT . Installation en dual boot Windows 10 en mode EFI en forçant nouveau.modeset=0 dans les options de démarrage après splash **[[17.04]]**| | N752V| {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|17.04]]** | fonctionne correctement sur ubuntu studio sauf BT . Installation en dual boot Windows 10 en mode EFI en forçant nouveau.modeset=0 dans les options de démarrage après splash **[[17.04]]**|
 | N752VX| {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | fonctionne ​ sur ubuntu 18.04. Installation en mode EFI mais il faut désactiver le secure boot et utiliser nomodeset au démarrage, puis installer le pilote propriétaire. **[[:​bionic|18.04]]**| | N752VX| {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | fonctionne ​ sur ubuntu 18.04. Installation en mode EFI mais il faut désactiver le secure boot et utiliser nomodeset au démarrage, puis installer le pilote propriétaire. **[[:​bionic|18.04]]**|
Ligne 367: Ligne 381:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
 +| P1504JA-BR048R |  {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Installation en mode EFI de Ubuntu 20.04.1 64 bits seul dans l'ordi : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22349947#​p22349947|zarthphil]] |
 | P42F-VO007X |  {{:​icons:​ok_32.png|32 bits}} | **[[:​trusty|14.04]]** |- | | P42F-VO007X |  {{:​icons:​ok_32.png|32 bits}} | **[[:​trusty|14.04]]** |- |
-| P42F-VO020X | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Micro externe ? Prise Jack unique pour entrée-sortie externe, ne fonctionne pas avec un micro seul branché sur Jack 3,5, pas pu tester avec un micro-casque - Tout le reste OK. Remboursement possible Windows 7 Pro (forfait 65 euros au 20 janvier, contacter service technique Asus comme conseillé sur [[http://​bons-constructeurs-ordinateurs.info/​|ce site]] | +| P42F-VO020X | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Micro externe ? Prise Jack unique pour entrée-sortie externe, ne fonctionne pas avec un micro seul branché sur Jack 3,5, pas pu tester avec un micro-casque - Tout le reste OK. Remboursement possible Windows 7 Pro (forfait 65 euros au 20 janvier, contacter service technique Asus comme conseillé sur [[https://​bons-constructeurs-ordinateurs.info/​|ce site]] | 
-| PRO31S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10 | [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=169074|audio]] |+| PRO31S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.10 | [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=169074|audio]] |
 | P50ij | {{:​icons:​ok_32.png|32 bits}} | 12.04 | Voir [[:​retro-eclairage]] | | P50ij | {{:​icons:​ok_32.png|32 bits}} | 12.04 | Voir [[:​retro-eclairage]] |
 | P2530UA-XO0949RB | {{:​icons:​ok_64.png|64 bits}} | 16.04 | Tout fonctionne, installé en mode à l'​ancienne sans EFI | | P2530UA-XO0949RB | {{:​icons:​ok_64.png|64 bits}} | 16.04 | Tout fonctionne, installé en mode à l'​ancienne sans EFI |
 | P52F-SO045X | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | wifi,​son,​carte graphique, tous fonctionnent sans manipulation (webcam à l'​envers résolu après configuration)| | P52F-SO045X | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | wifi,​son,​carte graphique, tous fonctionnent sans manipulation (webcam à l'​envers résolu après configuration)|
-| PU301LA-RO032G | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 7 préinstallé en mode EFI : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1699131|post Alcyone]]|+| PU301LA-RO032G | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 7 préinstallé en mode EFI : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1699131|post Alcyone]]|
 | P750LB | {{:​icons:​ok_64.png|64 bits}} | [[:​artful|17.10]] | Touchpad non détecté par le noyau | | P750LB | {{:​icons:​ok_64.png|64 bits}} | [[:​artful|17.10]] | Touchpad non détecté par le noyau |
 | PX553VD-FY144R | {{:​icons:​ok_64.png|64 bits}} | 17.10 | Sauf luminosité au clavier [[https://​www.materiel.net/​pc-portable/​asuspro-px553vd-fy144r-i7-16-go-ssd-gtx-1050-144127.html#​ |(ref)]] | | PX553VD-FY144R | {{:​icons:​ok_64.png|64 bits}} | 17.10 | Sauf luminosité au clavier [[https://​www.materiel.net/​pc-portable/​asuspro-px553vd-fy144r-i7-16-go-ssd-gtx-1050-144127.html#​ |(ref)]] |
Ligne 380: Ligne 395:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| Q500A | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation Ubuntu 13.10 en dual-boot avec Windows 8 préinstallé,​ les deux OS installés en mode EFI, "​Secure Boot" désactivé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1446831|longdivision]] |+| Q500A | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation Ubuntu 13.10 en dual-boot avec Windows 8 préinstallé,​ les deux OS installés en mode EFI, "​Secure Boot" désactivé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1446831|longdivision]] |
  
  
Ligne 387: Ligne 402:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| R1E | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​precise|12.04]]** **[[:​trusty|14.04]]** ​15.04 | Si jamais le Live CD ne détecte pas le disque dur de votre Asus R1E, il suffit d'​aller dans le BIOS (taper F2) puis faire l'​onglet Advanced -> IDE Configuration -> Dans SATA Operation Mode choisir "​Compatible"​ au lieu de "​Enhanced"​. Pour l'​écran tactile voir [[:​wacom|ici]] et [[http://​linuxwacom.sourceforge.net/​index.php/​main|là]]. [[:​utilisateurs:​Stead]] webmat.fr |+| R1E | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 15.04 | Si jamais le Live CD ne détecte pas le disque dur de votre Asus R1E, il suffit d'​aller dans le BIOS (taper F2) puis faire l'​onglet Advanced -> IDE Configuration -> Dans SATA Operation Mode choisir "​Compatible"​ au lieu de "​Enhanced"​. Pour l'​écran tactile voir [[:​wacom|ici]] et [[http://​linuxwacom.sourceforge.net/​index.php/​main|là]]. [[:​utilisateurs:​Stead]] webmat.fr |
 | R409CC-WX306H | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​trusty|14.04]]** | Tout est OK, sauf utilisation du Touchpad qui n'est pas fiable : emploi d'une souris préconisé;​ niveau d'​éclairage de l'​écran non mémorisé | | R409CC-WX306H | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​trusty|14.04]]** | Tout est OK, sauf utilisation du Touchpad qui n'est pas fiable : emploi d'une souris préconisé;​ niveau d'​éclairage de l'​écran non mémorisé |
-| R409CC-WX306H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Les défauts constatés avec Trusty 14.4 sont corrigés. ​Voir astuce ​pour réinstallation complète suite à mise à jour de 14.4 vers 16.4 sur [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21551939#​p21551939|post de mgl01]] | +| R409CC-WX306H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Voir astuce sur [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21551939#​p21551939|post de mgl01]] | 
-| R409LC-WX118H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** \\ **[[:​xenial|16.04]]** | - installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 seul ( Windows 8 préinstallé a été viré). Des modifs sont nécessaires pour le touchpad et les touches fn. Il reste des pb non résolus avec le bluetooth et la sortie de veille ​ : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1757521|Clo92]] \\ - installation en mode non-EFI de Ubuntu 16.04.1 64 bits seul ( Windows 8 préinstallé a été viré) : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2014104|CROZET]] | +| R409LC-WX118H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | - installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 seul ( Windows 8 préinstallé a été viré). Des modifs sont nécessaires pour le touchpad et les touches fn. Il reste des pb non résolus avec le bluetooth et la sortie de veille ​ : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1757521|Clo92]] \\ - installation en mode non-EFI de Ubuntu 16.04.1 64 bits seul ( Windows 8 préinstallé a été viré) : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2014104|CROZET]] | 
-| R409LDV-WX260H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 en dual-boot avec Windows 8 préinstallé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1659441|Greg314]] |+| R409LDV-WX260H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 en dual-boot avec Windows 8 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1659441|Greg314]] | 
 +| R415JA-EK143T | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | installation en mode EFI de Ubuntu 20.04.1 en dual-boot avec Windows 10 préinstallé. Il faut laisser le paramètre **SATA Mode Selection** du Bios sur sa valeur par défaut (ne pas la passer sur "​AHCI"​) mais opérer depuis Windows 10 pour désactiver Optane H10 : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22403411#​p22403411|alexandre_caze]] |
 | R455LJ-WX274T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​xenial|16.04]]** |Installation,​ en 64 bits, en mode EFI de Ubuntu **[[:​xenial|16.04 LTS]]** en remplacement de Windows 10 préinstallé. Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1991909|mgl01]]. Les touches fn+F5 et fn+F6 ne fonctionnent pas Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1991907|mgl01]]. Le fonctionnement du touchpad est à améliorer. | | R455LJ-WX274T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​xenial|16.04]]** |Installation,​ en 64 bits, en mode EFI de Ubuntu **[[:​xenial|16.04 LTS]]** en remplacement de Windows 10 préinstallé. Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1991909|mgl01]]. Les touches fn+F5 et fn+F6 ne fonctionnent pas Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1991907|mgl01]]. Le fonctionnement du touchpad est à améliorer. |
-| R500A-SX613H | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | installation **[[:​precise|12.04]]**.3 en dual-boot avec Windows 8 préinstallé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=14544351|mamuthronchon]] | +| R500A-SX613H | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | installation **[[:​precise|12.04]]**.3 en dual-boot avec Windows 8 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=14544351|mamuthronchon]] | 
-| R500VD | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1023811|Présentation de l'​installation]],​ installation de Kubuntu .1 64 bits en UEFI en dual-boot avec Windows 8 préinstallé : exemple de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1723691|mvb1]] [[http://​forum.ubuntu-fr.org/​profile.php?​id=204973|tobiasBora]] [[http://​forum.ubuntu-fr.org/​profile.php?​id=33223|Chuck Maurice]] |+| R500VD | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1023811|Présentation de l'​installation]],​ installation de Kubuntu .1 64 bits en UEFI en dual-boot avec Windows 8 préinstallé : exemple de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1723691|mvb1]] [[http://​forum.ubuntu-fr.org/​profile.php?​id=204973|tobiasBora]] [[http://​forum.ubuntu-fr.org/​profile.php?​id=33223|Chuck Maurice]] |
 | R500VD-SX258V | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 en dual-boot avec Windows 7 : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15729881#​p15729881|Exemple Teymyro]] ​ | | R500VD-SX258V | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 en dual-boot avec Windows 7 : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15729881#​p15729881|Exemple Teymyro]] ​ |
-| R510CC-XX1312H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** \\ **[[:​disco|19.04]]** | - installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** 64 bits en dual-boot avec Windows 8 préinstallé. Il faut faire une manip particulière pour la WiFi voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17634161|Aerendil97]] \\ - installation en mode EFI de Lubuntu **[[:​disco|19.04]]** 64 bits en dual-boot avec Windows 8 préinstallé ; Secure Boot désactivé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2044553|JoYo53]] | +| R500VD-SX907H | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Installation en mode EFI de Xubuntu 20.04 seul dans l'ordi : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2068230|FLXFLX]] ​ | 
-| R510CC-XX406H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 64 bits en dual-boot avec Windows 8 préinstallé : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1495421|Exemple Bonny]] ​ | +| R510CC-XX1312H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** \\ **[[:​disco|19.04]]** | - installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** 64 bits en dual-boot avec Windows 8 préinstallé. Il faut faire une manip particulière pour la WiFi voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17634161|Aerendil97]] \\ - installation en mode EFI de Lubuntu **[[:​disco|19.04]]** 64 bits en dual-boot avec Windows 8 préinstallé ; Secure Boot désactivé : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2044553|JoYo53]] | 
-| R510JX-DM103H | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits seul dans l'​ordi. Secure Boot doit être désactivé pour que le pilote WiFi puisse fonctionner : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2047284|curieuxUser]] ​ | +| R510CC-XX406H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 64 bits en dual-boot avec Windows 8 préinstallé : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1495421|Exemple Bonny]] ​ | 
-| R511LD-XX832H | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu 15.04 64 bits en dual-boot avec Windows 8 pré-installé. Certaines touches multimédia non reconnues. Problème touchpad besoin paquet focaltech-dkms mais où le trouver? [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=20162921|Exemple Vostock]] |+| R510JX-DM103H | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits seul dans l'​ordi. Secure Boot doit être désactivé pour que le pilote WiFi puisse fonctionner : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2047284|curieuxUser]] ​ | 
 +| R511LD-XX832H | {{:​icons:​ok_64.png|64 bits}}| **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu 15.04 64 bits en dual-boot avec Windows 8 pré-installé. Certaines touches multimédia non reconnues. Problème touchpad besoin paquet focaltech-dkms mais où le trouver? [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=20162921|Exemple Vostock]] |
 | R511LF-DM156T | {{:​icons:​ok_64.png|64 bits}}| **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 pré-installé. Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2034637|Deaats]] | | R511LF-DM156T | {{:​icons:​ok_64.png|64 bits}}| **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 pré-installé. Voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2034637|Deaats]] |
-| [[:​asus_R511LJ|R511LJ-XX682T]] | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** LTS 64 bits (en fait LinuxMint 17.2 Rafaelaen dual-boot avec Windows 10 pré-installé. Certaines touches multimédia non reconnues (RÉSOLU) [[:​utilisateurs:​claudiux|Claudiux]] |+| R511LJ-XX682T | {{:​icons:​ok_64.png|64 bits}} | 22.04 | Problèmes antérieurs ​(touchpad et wifireconnus sur les versions récentes d’Ubuntu. Certaines touches multimédia non reconnues (Voir cette [[retro-eclairage|page]]) [[:​utilisateurs:​claudiux|Claudiux]] |
 | R516UB-DM044T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu **[[:​xenial|16.04]]** LTS 64 bits (en fait Linux Mint 18 Sarah) seul dans l'ordi (Windows 10 préinstallé a été viré). "Fast boot" et "​Secure boot" désactivés. Voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21562417#​p21562417|vin100vin]] | | R516UB-DM044T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu **[[:​xenial|16.04]]** LTS 64 bits (en fait Linux Mint 18 Sarah) seul dans l'ordi (Windows 10 préinstallé a été viré). "Fast boot" et "​Secure boot" désactivés. Voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21562417#​p21562417|vin100vin]] |
 | R540UA-DM123 | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode non-EFI de Ubuntu **[[:​xenial|16.04.4]]** 64 bits seul dans l'ordi ([[https://​endlessos.com/​|Endless OS]] préinstallé d'​origine a été viré)."​Secure boot" désactivé. Voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2027079|bernic]] | | R540UA-DM123 | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode non-EFI de Ubuntu **[[:​xenial|16.04.4]]** 64 bits seul dans l'ordi ([[https://​endlessos.com/​|Endless OS]] préinstallé d'​origine a été viré)."​Secure boot" désactivé. Voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2027079|bernic]] |
Ligne 407: Ligne 424:
 | R540UP-G0141T ​ | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​disco|19.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits et 19.04 64 bits; paramètre de noyau pci=noaer nécessaire pour le WiFi : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2036616|dk32]] ​  | | R540UP-G0141T ​ | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​disco|19.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits et 19.04 64 bits; paramètre de noyau pci=noaer nécessaire pour le WiFi : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2036616|dk32]] ​  |
 | R541UJ-GQ294T ​ | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits ; paramètre de noyau pci=noaer nécessaire pour le WiFi : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2036616|dk32]] ​  | | R541UJ-GQ294T ​ | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits ; paramètre de noyau pci=noaer nécessaire pour le WiFi : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2036616|dk32]] ​  |
-| R556LF-XX088H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.3 64 bits en dual-boot avec Windows 10 (migré depuis Windows 8.1) : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1913561|ljourdieu]] | +| R556LF-XX088H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.3 64 bits en dual-boot avec Windows 10 (migré depuis Windows 8.1) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1913561|ljourdieu]] | 
-| R556LA-XX816H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.3 64 bits en dual-boot avec Windows 8.1 : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1966001|thipaire]] |+| R556LA-XX816H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.3 64 bits en dual-boot avec Windows 8.1 : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1966001|thipaire]] |
 | R556YI-XX233T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** \\ **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 16.04 64 bits (version de base avec noyau 4.4) en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020944|domiro]] \\ Installation en mode EFI de Ubuntu 18.04 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2034593|Sisiphe]] | | R556YI-XX233T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** \\ **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 16.04 64 bits (version de base avec noyau 4.4) en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020944|domiro]] \\ Installation en mode EFI de Ubuntu 18.04 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2034593|Sisiphe]] |
 | R558UQ |  {{:​icons:​ok_64.png|64 bits}} | 16.10 |  Système sur le ssd, boot ultra rapide ! Modèle exact: r558uq DM519T, pb de scroll '2 doigts'​ réglé par driver: [https://​github.com/​vlasenko/​hid-asus-fte-dkms]. ​ | | R558UQ |  {{:​icons:​ok_64.png|64 bits}} | 16.10 |  Système sur le ssd, boot ultra rapide ! Modèle exact: r558uq DM519T, pb de scroll '2 doigts'​ réglé par driver: [https://​github.com/​vlasenko/​hid-asus-fte-dkms]. ​ |
 | R702QA-BX074T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu **[[:​bionic|18.04]]** 64 bits en dual-boot avec Windows 10 préinstallé. Il faut faire une manip particulière pour la WiFi voir post [[https://​debian-facile.org/​viewtopic.php?​id=24695|DebianFacile]] | | R702QA-BX074T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu **[[:​bionic|18.04]]** 64 bits en dual-boot avec Windows 10 préinstallé. Il faut faire une manip particulière pour la WiFi voir post [[https://​debian-facile.org/​viewtopic.php?​id=24695|DebianFacile]] |
 | R702UA-BX782T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu Ubuntu 18.04.3 64 bits seul dans l'ordi (Windows 10 préinstallé a été viré) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2044568|Box11]] | | R702UA-BX782T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu Ubuntu 18.04.3 64 bits seul dans l'ordi (Windows 10 préinstallé a été viré) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2044568|Box11]] |
-| R752LJ-TY185T | {{:​icons:​ok_64.png|64 bits}} | [[:​wily|15.10]] | Installation en mode EFI de Ubuntu 15.10 64 bits en dual-boot avec Windows 10 préinstallé : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1950191|Exemple Rivcrn]] ​ |+| R752LJ-TY185T | {{:​icons:​ok_64.png|64 bits}} | [[:​wily|15.10]] | Installation en mode EFI de Ubuntu 15.10 64 bits en dual-boot avec Windows 10 préinstallé : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1950191|Exemple Rivcrn]] ​ |
 | R752LAV-TY141H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI d'​Ubuntu 16.04 64 bits avec Windows 8 préinstallé sans dual-boot ​  | | R752LAV-TY141H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI d'​Ubuntu 16.04 64 bits avec Windows 8 préinstallé sans dual-boot ​  |
 | R752LK-TY016H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04.0]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 8.1 préinstallé : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19246251#​p19246251|Exemple GG84]] ​ | | R752LK-TY016H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04.0]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 8.1 préinstallé : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19246251#​p19246251|Exemple GG84]] ​ |
Ligne 419: Ligne 436:
 | R900VB-YZ047H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 seul dans l'ordi (Windows 8 préinstallé à été viré) : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15851451#​p15851451|Exemple claire barnouin]] ​ |https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21501361#​p21501361 | R900VB-YZ047H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 seul dans l'ordi (Windows 8 préinstallé à été viré) : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15851451#​p15851451|Exemple claire barnouin]] ​ |https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21501361#​p21501361
 | R900VJ-YZ066H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 64 bits en dual-boot avec Windows 8.1 (Windows 8 préinstallé et mis à jour en 8.1) | | R900VJ-YZ066H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Installation en mode EFI de Ubuntu 13.10 64 bits en dual-boot avec Windows 8.1 (Windows 8 préinstallé et mis à jour en 8.1) |
 +| R553LN-DM553H| {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Installation Ubuntu 64 bits en dual-boot avec Windows 10.Pour l'​activation de la carte wifi, appliquer le fix mentionné en 3.. RUB_CMDLINE_LINUX_DEFAULT="​quiet splash acpi_osi=Linux"​ |
  
  
Ligne 424: Ligne 442:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| VivoBook S200E-CT182H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]**| Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** en cohabitation avec Windows 8 préinstallé ([[:​uefi#​activerdesactiver_le_secure_boot|Secure Boot]] désactivé) : Voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1587581| post perju]] |+| VivoBook S200E-CT182H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]**| Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** en cohabitation avec Windows 8 préinstallé ([[:​uefi#​activerdesactiver_le_secure_boot|Secure Boot]] désactivé) : Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1587581| post perju]] |
 | VivoBook S301LA-DH084H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** en cohabitation avec Windows 8.1 préinstallé (voir post ci-après). Il faut seulement désactiver le Fast Boot. Il reste un pb pour le wifi: il ne marche qu'​après mise en place d'un nouveau driver MT7630e mais CPU à 100% si WLAN actif ! L'​écran tactile est géré mais de façon rudimentaire([[:​uefi#​activerdesactiver_le_secure_boot|Secure Boot]] peut rester activé) : Voir [[http://​h30478.www3.hp.com/​t5/​Ordinateurs-portables-Syst%C3%A8mes-d-exploitation-D%C3%A9marrage-et/​UBUNTU-14-04-LTS-Trusty-Tahr-GPT-et-UEFI-BIOS/​td-p/​432062| post joe76000]] | | VivoBook S301LA-DH084H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** en cohabitation avec Windows 8.1 préinstallé (voir post ci-après). Il faut seulement désactiver le Fast Boot. Il reste un pb pour le wifi: il ne marche qu'​après mise en place d'un nouveau driver MT7630e mais CPU à 100% si WLAN actif ! L'​écran tactile est géré mais de façon rudimentaire([[:​uefi#​activerdesactiver_le_secure_boot|Secure Boot]] peut rester activé) : Voir [[http://​h30478.www3.hp.com/​t5/​Ordinateurs-portables-Syst%C3%A8mes-d-exploitation-D%C3%A9marrage-et/​UBUNTU-14-04-LTS-Trusty-Tahr-GPT-et-UEFI-BIOS/​td-p/​432062| post joe76000]] |
 | VivoBook S400CA |  {{:​icons:​ok_64.png|64 bits}} | 13.04 | Installation 13.04 en cohabitation avec Windows 8 préinstallé : Voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=13558451#​p13558451| post maccam]] \\ Solution pour la WiFi dans [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1280011 | ce fil]]| | VivoBook S400CA |  {{:​icons:​ok_64.png|64 bits}} | 13.04 | Installation 13.04 en cohabitation avec Windows 8 préinstallé : Voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=13558451#​p13558451| post maccam]] \\ Solution pour la WiFi dans [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1280011 | ce fil]]|
-| Vivobook S430UA-EB065T |  {{:​icons:​ok_64.png|64 bits}} | **[[:​Bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 préinstallé : Voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2031304| post erpiu]] |+| Vivobook S430UA-EB065T |  {{:​icons:​ok_64.png|64 bits}} | **[[:​Bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 préinstallé : Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2031304| post erpiu]] |
 | S46C | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Désactiver SecureBoot dans le BIOS, supprimer sdb1 18Go sur le SSD, et mettre dual-boot automatique Ubuntu / W8 fait par grub-efi. [[:​bumblebee]] des dépôts (12W au lieu de 18W). | | S46C | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Désactiver SecureBoot dans le BIOS, supprimer sdb1 18Go sur le SSD, et mettre dual-boot automatique Ubuntu / W8 fait par grub-efi. [[:​bumblebee]] des dépôts (12W au lieu de 18W). |
 | S5A | {{:​icons:​ok_32.png|32 bits}} | **[[:​trusty|14.04]]** | Pour avoir le son, éditer /​etc/​modprobe.d/​alsa-base.conf,​ et rajouter la ligne \\ ''​options snd-hda-intel model=3stack''​ |  | | S5A | {{:​icons:​ok_32.png|32 bits}} | **[[:​trusty|14.04]]** | Pour avoir le son, éditer /​etc/​modprobe.d/​alsa-base.conf,​ et rajouter la ligne \\ ''​options snd-hda-intel model=3stack''​ |  |
-| VivoBook \\ S551LB-CJ058H | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | Désactivation "​SecureBoot"​ dans le BIOS. Ubuntu **[[:​precise|12.04]]**.3 64 bits en dual-boot avec Windows 8 préinstallé : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1382611|post kholo]] |+| VivoBook \\ S551LB-CJ058H | {{:​icons:​ok_64.png|64 bits}} | **[[:​precise|12.04]]** | Désactivation "​SecureBoot"​ dans le BIOS. Ubuntu **[[:​precise|12.04]]**.3 64 bits en dual-boot avec Windows 8 préinstallé : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1382611|post kholo]] |
 | S56CB-XO170H | {{:​icons:​ok_64.png|64 bits}} | 13.04 | Désactivation nécessaire de "​SecureBoot"​ dans le BIOS pour dual-boot avec Windows 8 préinstallé : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=14492851#​p14492851|post Noxious62]] | | S56CB-XO170H | {{:​icons:​ok_64.png|64 bits}} | 13.04 | Désactivation nécessaire de "​SecureBoot"​ dans le BIOS pour dual-boot avec Windows 8 préinstallé : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=14492851#​p14492851|post Noxious62]] |
 | S56CB-XO302H |  {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | [[:​uefi#​activerdesactiver_le_secure_boot|Désactivation]] nécessaire de "​SecureBoot"​ dans l'​[[wpfr>​Unified_Extensible_Firmware_Interface|UEFI]] pour dual-boot avec Windows 8 préinstallé/​upgradé sur W10.\\ Si besoin désactiver le démarrage rapide dans windows pour pouvoir accéder à l'​UEFI.\\ Usage du SSD ((chez [[:​utilisateurs:​fabux|moi]] en ''/​dev/​sdb''​)) réservé au système (c'est à dire **/** + la [[:swap]] ). Installation de l'​amorçage sur ''/​dev/​sda''​ ((chez [[:​utilisateurs:​fabux|moi]] là où se trouve donc windows et le **/home**)) | | S56CB-XO302H |  {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | [[:​uefi#​activerdesactiver_le_secure_boot|Désactivation]] nécessaire de "​SecureBoot"​ dans l'​[[wpfr>​Unified_Extensible_Firmware_Interface|UEFI]] pour dual-boot avec Windows 8 préinstallé/​upgradé sur W10.\\ Si besoin désactiver le démarrage rapide dans windows pour pouvoir accéder à l'​UEFI.\\ Usage du SSD ((chez [[:​utilisateurs:​fabux|moi]] en ''/​dev/​sdb''​)) réservé au système (c'est à dire **/** + la [[:swap]] ). Installation de l'​amorçage sur ''/​dev/​sda''​ ((chez [[:​utilisateurs:​fabux|moi]] là où se trouve donc windows et le **/home**)) |
-| Vivobook S14 S410UN-EB078T |  {{:​icons:​ok_64.png|64 bits}} | [[:​artful|17.10]] | Installation en mode EFI de Ubuntu 17.10 64 bits seul dans l'ordi (Windows 10 préinstallé s'est fait virer). Secure Boot désactivé : Voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2017473| post mickyte]] ​ |+| Vivobook S14 S410UN-EB078T |  {{:​icons:​ok_64.png|64 bits}} | [[:​artful|17.10]] | Installation en mode EFI de Ubuntu 17.10 64 bits seul dans l'ordi (Windows 10 préinstallé s'est fait virer). Secure Boot désactivé : Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2017473| post mickyte]] ​ |
 | Vivobook S510UN-BQ183T |  {{:​icons:​ok_64.png|64 bits}} | [[:​artful|16.04]] | Installation en mode CMS/Legacy de Ubuntu LTS 16.04 64 bits seul dans l'ordi (Windows 10 préinstallé s'est fait virer). Secure Boot désactivé : Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020564| post incises]] ​ | | Vivobook S510UN-BQ183T |  {{:​icons:​ok_64.png|64 bits}} | [[:​artful|16.04]] | Installation en mode CMS/Legacy de Ubuntu LTS 16.04 64 bits seul dans l'ordi (Windows 10 préinstallé s'est fait virer). Secure Boot désactivé : Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020564| post incises]] ​ |
 | Vivobook S510UN-BQ184T |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|18.04]] | Installation en mode EFI de Ubuntu LTS 18.04 64 bits sur un SSD, Windows 10 sur l'​autre. Secure Boot non désactivé car introuvable dans le bios: Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2029193| post incises]] ​ | | Vivobook S510UN-BQ184T |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|18.04]] | Installation en mode EFI de Ubuntu LTS 18.04 64 bits sur un SSD, Windows 10 sur l'​autre. Secure Boot non désactivé car introuvable dans le bios: Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2029193| post incises]] ​ |
 | Vivobook S551L |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|18.04]] | Tout bien ! Secure Boot désactivé ​ | | Vivobook S551L |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|18.04]] | Tout bien ! Secure Boot désactivé ​ |
-| Vivobook S14 S410UF-EB080T |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|18.04.1 LTS]] | Installation en mode EFI de Ubuntu LTS 18.04 64 bits sur le HD de 1To. Secure Boot désactivé,​ 1er boot après achat sur clé USB Bionic, il n'a donc jamais connu Windows 10 et fonctionne très bien.  | +| Vivobook S14 S410UF-EB080T |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|18.04.1 LTS]] | Installation en mode EFI de Ubuntu LTS 18.04 64 bits sur le HD de 1To. Secure Boot désactivé,​ 1er boot après achat sur clé USB Bionic, il n'a donc jamais connu Windows 10 et fonctionne très bien. Up 2023 toujours au top sous ubuntu 23.10, 100% compatible | 
-| Vivobook S530FA |  {{wiki:​modeles:​laptop_work.png|64 bits}} | [[:​Bionic|18.04.2 LTS]] | Installation en mode EFI de Ubuntu LTS 18.04 64 bits sur le NVME  de 256 Go.  Secure Boot désactivé. Bios modifié pour activer le mode AHCI au lieu du mode RAID. Bios mis à jour afin de pouvoir booter de façon non aléatoire. ​  Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2042349|frosties29]] ​ |+| Vivobook S14 S433EA-EB030T |  {{:​icons:​ok_64.png|64 bits}} | [[:​Bionic|20.04 LTS]] | Installation de Ubuntu LTS 20.04 64 bits en gardant Windows 10 (disque dur préalablement désencrypté facilement dans les paramètres Windows). Ubuntu fonctionne bien sauf le pavé numérique tactile (service client ASUS dit: pas de support Linux, retournez à Windows). À la première mise à jour, Windows affiche un écran noir. Une utilisation limitée reste possible (CTRL+ALT+DEL > Fichier > ... > iexplore.exe par ex.) Le revendeur confirme qu'​avec ASUS, Windows ne tolère pas toujours la cohabitation avec Ubuntu ​  |  
 +| Vivobook S530FA |  {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | [[:​Bionic|18.04.2 LTS]] | Installation en mode EFI de Ubuntu LTS 18.04 64 bits sur le NVME  de 256 Go.  Secure Boot désactivé. Bios modifié pour activer le mode AHCI au lieu du mode RAID. Bios mis à jour afin de pouvoir booter de façon non aléatoire. ​  Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2042349|frosties29]]  | 
 +| Vivobook S533F |  {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | [[:​focal|20.04.1 LTS]] | installation en mode EFI de Ubuntu 20.04.1 en dual-boot avec Windows 10 préinstallé. Il faut laisser le paramètre **SATA Mode Selection** du Bios sur sa valeur par défaut (ne pas la passer sur "​AHCI"​) mais opérer depuis Windows 10 pour désactiver Optane H10 : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2061777|hoc_dev]] ​ | 
 +| VivoBook S712DA-AU024T |  {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | [[:​focal|20.04.1 LTS]] | installation en mode EFI de Ubuntu 20.04.1 en dual-boot avec Windows 10 préinstallé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2062202|novice852015]]  |
  
-===== T =====+===== T (pas TUF, voir plus bas) =====
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| T91 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.10 | Pour la carte graphique voir la page [[:​poulsbo]]. Pour activer le son : Choisir l'​option PCM. Pour configurer l’écran tactile voir [[:​evdev|ici]] ou [[evtouch|ici]] | +| T91 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.10 | Pour la carte graphique voir la page [[:​poulsbo]]. Pour activer le son : Choisir l'​option PCM. Pour configurer l’écran tactile voir [[:​evdev|ici]] ou [[egalax|ici]] | 
-| T91MT | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.10 | Pour la carte graphique voir la page [[:​poulsbo]]. Pour activer le son : Choisir l'​option PCM. Pour configurer l’écran tactile voir [[:​evdev|ici]] ou [[evtouch|ici]]. |+| T91MT | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.10 | Pour la carte graphique voir la page [[:​poulsbo]]. Pour activer le son : Choisir l'​option PCM. Pour configurer l’écran tactile voir [[:​evdev|ici]] ou [[egalax|ici]]. |
 | T200TAC | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode UEFI 64 de Ubuntu **[[:​trusty|14.04]]** en dual-boot avec Windows 8.1 préinstallé dans l'eMMC 64GB (NB: fait sur T200TA-CP017H qui semble différent des T200TA avec eMMC 32GB). La configuration du BIOS (V 203) est restée inchangée sauf pour l'​ordre de boot à partir de la clef USB (faite sous Ubuntu **[[:​precise|12.04]]** avec le '​Créateur de disque de démarrage'​). Les webcams ne marchent pas. Le Wifi non plus car le composant BC43341 n'est pas pris en charge par brcmfmac sur des noyaux antérieurs à 4.0. Après chargement d'un noyau 4.1, le Wifi marche bien une dizaine de secondes puis se coupe. Il faudra attendre Xenius!... En attendant, le Wifi marche parfaitement avec un adaptateur externe (Netgear N150 WNA1000M par exemple). | | T200TAC | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode UEFI 64 de Ubuntu **[[:​trusty|14.04]]** en dual-boot avec Windows 8.1 préinstallé dans l'eMMC 64GB (NB: fait sur T200TA-CP017H qui semble différent des T200TA avec eMMC 32GB). La configuration du BIOS (V 203) est restée inchangée sauf pour l'​ordre de boot à partir de la clef USB (faite sous Ubuntu **[[:​precise|12.04]]** avec le '​Créateur de disque de démarrage'​). Les webcams ne marchent pas. Le Wifi non plus car le composant BC43341 n'est pas pris en charge par brcmfmac sur des noyaux antérieurs à 4.0. Après chargement d'un noyau 4.1, le Wifi marche bien une dizaine de secondes puis se coupe. Il faudra attendre Xenius!... En attendant, le Wifi marche parfaitement avec un adaptateur externe (Netgear N150 WNA1000M par exemple). |
 | T200TAC | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Mise à niveau à partir de la 14.04 mise à jour (cf ci-avant). Le Wifi est alors opérationnel mais pas les webcams.| | T200TAC | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Mise à niveau à partir de la 14.04 mise à jour (cf ci-avant). Le Wifi est alors opérationnel mais pas les webcams.|
-TUF505DY | | | ne fonctionne pas erreur acpi, amdgpu erreur | +TM420IA-EC172T ​| {{:icons:ok_64.png|64 bits}} | **[[:focal|20.04]]** Vivobook Flip 14. Après avoir vérifié que tout fonctionnait en live USB (sauf la luminosité de l'​écran ​et la rotation automatique de l'écran), installation via la live USB d'Ubuntu. Bonne surprise : la luminosité ​est en fait contrôlable ! Tout fonctionne donc webcam, bluetooth, wifi, sans problème ni installation d'un driver supplémentaire (à ma grande surprise !!)Pour l'instant seule la rotation automatique ​de l'écran ne peut pas se faire : le noyau ne supporte pas encore ​l'accéléromètre ([[https://community.amd.com/t5/drivers-software/​provide-amd-sensor-fusion-hub-driver-for-linux-kernel/m-p/​445121/​highlight/​true#​M138881|le driver écrit par AMD, probablement mergé dans Linux 5.11, ne supporte visiblement pas les CPU Renoir]])Les hotkeys Asus fonctionnent. L'écran tactile n'est pas si mal supporté (la seule configuration a consisté à activer le clic secondaire). Une excellente surprise. | 
-| TUF505DY-BQ004 | {{wiki:modeles:laptop_work.png|Fonctionne après config}} | [[:eoan|19.10]] | PC full-AMD ​(processeur ​et carte graphique) avec HDD+SSD.\\ ​ * Firmware UEFI sans "​Legacy mode", ​l'installeur "live" fonctionne mais c'​est ​compliqué avec "​netinst"​ ou "​mini"​ (moi je n'ai pas réussi ​en tous cas).\\ ​ * Le bus NVMe du disque SSD Western Digital ​fait planter le noyau si on ajoute pas cette boot option ​: ''​nvme_core.default_ps_max_latency_us=5500'​' ​(editer ​la config Grub à chaque démarrage ​de l'installeur puis modifier /​etc/​default/​grub après ​l'installation). Voir [[https://www.linux.org/threads/boot-problems-with-ubuntu-boot-hangs.24385/|ce post]] entre autres.\\  * Pas de pilote pour la carte wifi, après l'installation,​ on peut ajouter ce [[https://​github.com/​tomaspinho/​rtl8821ce|pilote communautaire]].\\  ​Le trackpad ​fonctionne ​très mal (mouvements erratiquessauts). |+| TP401 | {{:​icons:​ok_64.png|64 bits}} | **[[:bionic|18.04]]** | VivoBook Flip 14 TP401. Tout fonctionne (écran tactilewifi, webcam, rotation de l'​écran,​ bluetooth ...). Testé sur modèle TP401MA-BZ067TS qui est un sous-modèle de J401MA.| 
 + 
 + 
 ===== Transformer Book ===== ===== Transformer Book =====
  
Ligne 461: Ligne 485:
  
 ^ Modèle ^ État ^ Versions ^ Matériels mal supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels mal supportés / Résolutions ^
 +| T101ha | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 22.10 | Sécure Boot à désactiver dans le Bios. La webcam n'est pas reconnue. Voir plus ici [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2077592|Forum Ubuntu]]. Wifi, bluetooth,, lecteur de carte et son OK avec la 22.10 (pas de son avec la 22.04, voir sous ce tableau). Sous gnome : rotation OK de l’écran en mode tablette.|
 | T102ha | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04.1 | Grub-install ne sait pas bien coder le paramétrage du fichier /​EFI/​ubuntu/​grub.cfg. Boot-repair ne sait pas installer l'​option modprobe.blacklist=nouveau. Extinction par poweroff. Pas de son. Navigation internet pas possible. ​  Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21666990#​p21666990/​|ici]]| | T102ha | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 16.04.1 | Grub-install ne sait pas bien coder le paramétrage du fichier /​EFI/​ubuntu/​grub.cfg. Boot-repair ne sait pas installer l'​option modprobe.blacklist=nouveau. Extinction par poweroff. Pas de son. Navigation internet pas possible. ​  Voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=21666990#​p21666990/​|ici]]|
  
-===== TUF =====+Sous Ubuntu 22.04, si vous perdez le son, cela peut venir d'un conflit entre la carte son interne sof-bytcht rt5645, et la sortie son HDMI. Une solution peut fonctionner si vous blacklister le module HDMI, avec [[nano|Nano]] par exemple : 
 + 
 +<​code>​sudo nano /​etc/​modprobe.d/​blacklist.conf</​code>​ 
 +Et ajoutez à la fin du fichier : 
 +<​code>​blacklist snd_hdmi_lpe_audio</​code>​ 
 + 
 + 
 +===== TUF / TUF Gaming ​=====
  
 ^ Modèle ^ État ^ Versions ^ Matériels mal supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels mal supportés / Résolutions ^
 | FX505DD | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 19.04 | 1. **Carte WiFi Realtek rlt8821ce** non reconnue, il faut installer ce [[https://​github.com/​tomaspinho/​rtl8821ce|driver]]. Procédure [[https://​askubuntu.com/​questions/​1071299/​how-to-install-wi-fi-driver-for-realtek-rtl8821ce-on-ubuntu-18-04|ici]]. \\ 2. **Nvidia Prime** ne fonctionne pas. \\ 3. **Nvidia Aura** (changement de la couleur de rétroéclairage du clavier) ne fonctionne pas, le clavier est éclairé en rouge par défaut. | | FX505DD | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 19.04 | 1. **Carte WiFi Realtek rlt8821ce** non reconnue, il faut installer ce [[https://​github.com/​tomaspinho/​rtl8821ce|driver]]. Procédure [[https://​askubuntu.com/​questions/​1071299/​how-to-install-wi-fi-driver-for-realtek-rtl8821ce-on-ubuntu-18-04|ici]]. \\ 2. **Nvidia Prime** ne fonctionne pas. \\ 3. **Nvidia Aura** (changement de la couleur de rétroéclairage du clavier) ne fonctionne pas, le clavier est éclairé en rouge par défaut. |
-| TUF565GE-AL365 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 19.10 | Ordinateur ​Livré ​sans O.S. L'​installation standard de windows provoque l'​activation de OPTANE ​qu'il faut déactiver ​afin de pouvoir accéder au NVME.  Voir Post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22231161#​p22231161|Erafia]]| +| FX705DD-AU092 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04 | Installation de Xubuntu 20.04 : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2067349|Maxym]] | 
-| TUF505DY | | | ne fonctionne pas erreur ​acpiamdgpu ​erreur |+| TUF565GE-AL365 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 19.10 | Ordinateur ​livré ​sans O.S. L'​installation standard de windows provoque l'​activation de [[https://​fr.wikipedia.org/​wiki/​3D_XPoint|Intel Optane]] ​qu'il faut désactiver ​afin de pouvoir accéder au NVME, voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22231161#​p22231161|Erafia]].
 +| TUF505DY | | < 20.04  ​Ne fonctionne paserreur ​Acpi, erreur ​Amdgpu.  ​|
 | TUF505DY-BQ004 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | [[:​eoan|19.10]] | PC full-AMD (processeur et carte graphique) avec HDD+SSD.\\ ​ * Firmware UEFI sans "​Legacy mode", l'​installeur "​live"​ fonctionne mais c'est compliqué avec "​netinst"​ ou "​mini"​ (moi je n'ai pas réussi en tous cas).\\ ​ * Le bus NVMe du disque SSD Western Digital fait planter le noyau si on ajoute pas cette boot option : ''​nvme_core.default_ps_max_latency_us=5500''​ (editer la config Grub à chaque démarrage de l'​installeur puis modifier /​etc/​default/​grub après l'​installation). Voir [[https://​www.linux.org/​threads/​boot-problems-with-ubuntu-boot-hangs.24385/​|ce post]] entre autres.\\ ​ * Pas de pilote pour la carte wifi, après l'​installation,​ on peut ajouter ce [[https://​github.com/​tomaspinho/​rtl8821ce|pilote communautaire]].\\ ​ * Le trackpad fonctionne très mal (mouvements erratiques, sauts). | | TUF505DY-BQ004 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | [[:​eoan|19.10]] | PC full-AMD (processeur et carte graphique) avec HDD+SSD.\\ ​ * Firmware UEFI sans "​Legacy mode", l'​installeur "​live"​ fonctionne mais c'est compliqué avec "​netinst"​ ou "​mini"​ (moi je n'ai pas réussi en tous cas).\\ ​ * Le bus NVMe du disque SSD Western Digital fait planter le noyau si on ajoute pas cette boot option : ''​nvme_core.default_ps_max_latency_us=5500''​ (editer la config Grub à chaque démarrage de l'​installeur puis modifier /​etc/​default/​grub après l'​installation). Voir [[https://​www.linux.org/​threads/​boot-problems-with-ubuntu-boot-hangs.24385/​|ce post]] entre autres.\\ ​ * Pas de pilote pour la carte wifi, après l'​installation,​ on peut ajouter ce [[https://​github.com/​tomaspinho/​rtl8821ce|pilote communautaire]].\\ ​ * Le trackpad fonctionne très mal (mouvements erratiques, sauts). |
-| [[:​asus-a17-tuf66iu|A17-TUF766IU-H7074T]] \\ [[:​asus-a17-tuf66iu|Série A17-TUF766IU]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04 | Nécessite l'​utilisation du **kernel 5.8** qui n'est pas installé par défaut et qu'il faut donc installer manuellement. Pas de Live CD possible. Voir cette page pour plus de détails :  [[:​asus-a17-tuf66iu|Page dédiée au portable Asus A17-TUF766IU-H7074T ]]| +| TUF505GT-BQ202T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04.1 | Mise à jour du Bios impérative pour pouvoir passer le paramètre "Sata Configuration"​ sur AHCI. Installation en mode EFI de Ubuntu 20.04.1 à la place du Windows 10 préinstallé d'​origine puis installation en dual-boot d'un Windows 10 tout propre : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2060181|niknux]]| 
- +| TUF566II-HN159T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04.1 | Installation en mode EFI de Ubuntu 20.04.1 en dual-boot avec Windows 10 préinstallé. Nécessite l'​utilisation d'un noyau de la famille 5.8 ou plus : voir les détails dans le fil créé par [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2059484|OlivierDel]].| 
 +| [[:​asus-a17-tuf766iu|A17-TUF766IU-H7074T]] \\ [[:​asus-a17-tuf766iu|Série A17-TUF766IU]] | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04.1 | Nécessite l'​utilisation du **kernel 5.8** qui n'est pas installé par défaut et qu'il faut donc installer manuellement. Pas de Live CD possible. Voir cette page pour plus de détails : [[:​asus-a17-tuf766iu|Page dédiée au portable Asus A17-TUF766IU-H7074T ]]| 
 +| A15 566IU-HN326T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 20.04.1 | Installation en mode EFI de Ubuntu 20.04.1 en dual-boot avec Windows 10 préinstallé. Nécessite l'​utilisation du **kernel 5.8** qui n'est pas installé par défaut et qu'il faut donc installer manuellement. Secure Boot désactivé. Voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2057886|Aposkunz]]| 
 +| Dash-F15 \\ [[:​dashf15_fx516pe | FX516PE]] | {{:​icons:​ok_64.png | 64 bits}} | 20.04.2 | Installation de **Ubuntu 20.04.2** depuis clef USB bootable. \\ dual-boot avec **Windows 10 préinstallé**. \\ **Secure Boot __désactivé__**.\\ Plus de détails : [[:​dashf15_fx516pe | Page dédiée au portable Asus séries F15 FX516PE ]]\\ Je débute alors je reviendrais compléter si besoin.\\ **Pe@cE**.| 
 +| TUF-Gaming\\ FX705DU | {{:​icons:​ok_64.png | 64 bits}} | 20.04.4 | Windows 10 supprimé. **Obligation** de déactiver le Secure Boot pour réussir à obtenir la grille grub. Voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22580238#​p22580238|Ubuntu1]] |
 ===== TX ===== ===== TX =====
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| TX300CA | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Ubuntu **[[:​trusty|14.04]]** installé en mode EFI en cohabitation avec Windows 8.1 : il faut installer Ubuntu dans le SSD (et pas dans le HDD) : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1608831|post Overcrash86]] |+| TX300CA | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Ubuntu **[[:​trusty|14.04]]** installé en mode EFI en cohabitation avec Windows 8.1 : il faut installer Ubuntu dans le SSD (et pas dans le HDD) : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1608831|post Overcrash86]] |
 ===== U ===== ===== U =====
  
Ligne 482: Ligne 518:
 | U3SG | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.04 |   GPS | | U3SG | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.04 |   GPS |
 | U30JC | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 11.04 | **Optimus** ne fonctionne pas sur 11.01, cela est résolu dans les versions récentes d'​Ubuntu. [[:​utilisateurs:​sam101]] [[:​utilisateurs:​Le vecteur]] | | U30JC | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 11.04 | **Optimus** ne fonctionne pas sur 11.01, cela est résolu dans les versions récentes d'​Ubuntu. [[:​utilisateurs:​sam101]] [[:​utilisateurs:​Le vecteur]] |
-| U30SD | {{:​icons:​ok_64.png|64 bits}} | 16.04 |  Optimus avec [[:prime]] ou bumblebee. ​Plus de problème de mise en veille. Un petit loquet se trouvant sur le devant permet d'​activer ou de désactiver le Wifi. Cette fonctionnalité est très pratique pour économiser la batterie. Par contre, il faut démarrer avec le loquet en position ON pour pouvoir utiliser le Wifi : le passage en position ON après avoir démarré sur OFF semble ne pas fonctionner.  |+| U30SD | {{:​icons:​ok_64.png|64 bits}} | 20.04 |  Optimus avec [[:prime]] ou bumblebee. ​Mais après installation écran noir, il faut désinstaller ​le pilote nvidia ​pour que l'​ordinateur démarre.  |
 | U31F | {{:​icons:​ok_64.png|64 bits}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} ​ | 11.04 et **[[:​precise|12.04]]** ​ | problème de retour de mise en veille sous **[[:​precise|12.04]]** mais pas sous 11.04 | | U31F | {{:​icons:​ok_64.png|64 bits}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} ​ | 11.04 et **[[:​precise|12.04]]** ​ | problème de retour de mise en veille sous **[[:​precise|12.04]]** mais pas sous 11.04 |
 | U32VJ | {{:​icons:​ok_64.png|64 bits}} | 12.10 | Pour 12.10, il est impératif de désactiver "​Secure Boot" dans le "​Bios"​| | U32VJ | {{:​icons:​ok_64.png|64 bits}} | 12.10 | Pour 12.10, il est impératif de désactiver "​Secure Boot" dans le "​Bios"​|
Ligne 497: Ligne 533:
 | UX302LG-C4007P | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Le noyau de Kubuntu **[[:​trusty|14.04]]** ne gère pas correctement l'​affichage : il est nécessaire de le remplacer par un noyau 3.15.0-X comme l'​indique ce post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17569141#​p17569141|siddhartha]]| | UX302LG-C4007P | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Le noyau de Kubuntu **[[:​trusty|14.04]]** ne gère pas correctement l'​affichage : il est nécessaire de le remplacer par un noyau 3.15.0-X comme l'​indique ce post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17569141#​p17569141|siddhartha]]|
 | UX302LG-C4027H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple d'​installation de Ubuntu **[[:​trusty|14.04]]** en mode EFI en dual-boot avec Windows 8 préinstallé : post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16829841#​p16829841|Hayawane]] \\ Option de boot "​nomodeset"​ nécessaire pour démarrer sur le support d'​installation mais après installation,​ on peut adopter l'​option "​acpi_osi="​ comme expliqué dans [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16821801#​p16821801|ce post de mkz*]] et la gestion de l'​affichage peut alors être améliorée par Prime (voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16824231#​p16824231|ce post]])| | UX302LG-C4027H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple d'​installation de Ubuntu **[[:​trusty|14.04]]** en mode EFI en dual-boot avec Windows 8 préinstallé : post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16829841#​p16829841|Hayawane]] \\ Option de boot "​nomodeset"​ nécessaire pour démarrer sur le support d'​installation mais après installation,​ on peut adopter l'​option "​acpi_osi="​ comme expliqué dans [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16821801#​p16821801|ce post de mkz*]] et la gestion de l'​affichage peut alors être améliorée par Prime (voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16824231#​p16824231|ce post]])|
-| UX303LA-R40025G | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.3 64 bits tout seul (Windows 7 préinstallé a été viré) : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1901791|trackgang]]|+| UX303LA-R40025G | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.3 64 bits tout seul (Windows 7 préinstallé a été viré) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1901791|trackgang]]|
 | UX303LA-R40037G | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Installation en mode EFI de Ubuntu 15.04 64 bits tout seul sur le SSD et partition /home sur le HDD après remboursement de la licence Windows 7. \\ Le touchpad est reconnu en tant que souris PS2 jusqu'​à l'​installation du paquet [[https://​launchpad.net/​~hanipouspilot/​+archive/​ubuntu/​focaltech-dkms|focaltech-dkms]] ou mise à jour vers 15.10. \\ Le contrôle du rétro-éclairage fonctionne mais les touches Fonction liées ne sont pas reconnues. \\ Le driver du module sans-fil Intel est quelque peu buggé en Wi-Fi n, je conseille de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1550761|le désactiver]].| | UX303LA-R40037G | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Installation en mode EFI de Ubuntu 15.04 64 bits tout seul sur le SSD et partition /home sur le HDD après remboursement de la licence Windows 7. \\ Le touchpad est reconnu en tant que souris PS2 jusqu'​à l'​installation du paquet [[https://​launchpad.net/​~hanipouspilot/​+archive/​ubuntu/​focaltech-dkms|focaltech-dkms]] ou mise à jour vers 15.10. \\ Le contrôle du rétro-éclairage fonctionne mais les touches Fonction liées ne sont pas reconnues. \\ Le driver du module sans-fil Intel est quelque peu buggé en Wi-Fi n, je conseille de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1550761|le désactiver]].|
-| UX303LA-R4165H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Installation en mode EFI de Ubuntu 14.10 64 bits en dual-boot avec Windows 8.1 préinstallé : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1780461|Hezerune]]|+| UX303LA-R4165H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Installation en mode EFI de Ubuntu 14.10 64 bits en dual-boot avec Windows 8.1 préinstallé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1780461|Hezerune]]|
 | UX303LA-R4383H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation LiveUsb en mode UEFI (fastboot et secureboot désactivés) d'​Ubuntu Desktop **[[:​trusty|14.04]]** 64 bits en écrasant le Windows 8.1 préinstallé. Nécessité d'​installer un custom kernel pour le touchpad détecté par défaut en simple souris PS2. Ce kernel entraîne l'​obligation de réinstaller la dernière version du package virtualbox, si utilisé.| | UX303LA-R4383H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Installation LiveUsb en mode UEFI (fastboot et secureboot désactivés) d'​Ubuntu Desktop **[[:​trusty|14.04]]** 64 bits en écrasant le Windows 8.1 préinstallé. Nécessité d'​installer un custom kernel pour le touchpad détecté par défaut en simple souris PS2. Ce kernel entraîne l'​obligation de réinstaller la dernière version du package virtualbox, si utilisé.|
 | UX303LA-R4478H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** ​ | Installation LiveUsb en mode UEFI (fastboot et secureboot désactivés) de Ubuntu **[[:​trusty|14.04]]**.2 64 bits sur le disque SSD de 24G en dual-boot avec Windows 8.1 pré-installé. Touchpad détecté par défaut en simple souris PS2, Installation du package [[https://​launchpad.net/​~hanipouspilot/​+archive/​ubuntu/​focaltech-dkms|focaltech-dkms]] . Touches de rétro-éclairage up et down ne fonctionnent pas, utilisation de [[:​retro-eclairage|Xbacklight]].| | UX303LA-R4478H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** ​ | Installation LiveUsb en mode UEFI (fastboot et secureboot désactivés) de Ubuntu **[[:​trusty|14.04]]**.2 64 bits sur le disque SSD de 24G en dual-boot avec Windows 8.1 pré-installé. Touchpad détecté par défaut en simple souris PS2, Installation du package [[https://​launchpad.net/​~hanipouspilot/​+archive/​ubuntu/​focaltech-dkms|focaltech-dkms]] . Touches de rétro-éclairage up et down ne fonctionnent pas, utilisation de [[:​retro-eclairage|Xbacklight]].|
 | UX303LN | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Fonctionne, écran tactile reconnu par défaut pour 1 doigt, mais paramétrable avec Touchegg... mais touchpad reconnu comme souris 2 boutons simple. Optimus Prime fonctionne en suivant la doc. Si l'​écran tactile semble ne plus répondre par moment il faut le calibrer avec calibrate-touchscreen| | UX303LN | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Fonctionne, écran tactile reconnu par défaut pour 1 doigt, mais paramétrable avec Touchegg... mais touchpad reconnu comme souris 2 boutons simple. Optimus Prime fonctionne en suivant la doc. Si l'​écran tactile semble ne plus répondre par moment il faut le calibrer avec calibrate-touchscreen|
 | UX303LN-R4200H | {{:​icons:​ok_64.png|64 bits}} ​ | 14.10 | Fonctionne sans problème. Boot sur clé USB live Ubuntu 14.10-64bits. Pas besoin de désactiver le "​Secure Boot" dans le Bios, puis installation sans problème en [[https://​fr.wikipedia.org/​wiki/​Unified_Extensible_Firmware_Interface|UEFI]]. | | UX303LN-R4200H | {{:​icons:​ok_64.png|64 bits}} ​ | 14.10 | Fonctionne sans problème. Boot sur clé USB live Ubuntu 14.10-64bits. Pas besoin de désactiver le "​Secure Boot" dans le Bios, puis installation sans problème en [[https://​fr.wikipedia.org/​wiki/​Unified_Extensible_Firmware_Interface|UEFI]]. |
-| UX303LN-R4197H |  {{:​icons:​ok_64.png|64 bits}} | 14.10 | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits tout seul (Windows 8.1 préinstallé à été viré). Astuce nécessaire pour régler un souci de touchpad : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1768631|Froggy McSwamp]] | +| UX303LN-R4197H |  {{:​icons:​ok_64.png|64 bits}} | 14.10 | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits tout seul (Windows 8.1 préinstallé à été viré). Astuce nécessaire pour régler un souci de touchpad : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1768631|Froggy McSwamp]] | 
-| UX303UA-R4107T |  {{:​icons:​ok_64.png|64 bits}} | 16.04 | Installation en mode EFI de Ubuntu **[[:​xenial|16.04]]** 64 bits tout seul (Windows 10 préinstallé à été viré, après [[http://​bons-constructeurs-ordinateurs.info/​|demande de remboursement de l'OS à Asus]] par mail (59€)).\\ Pour faire fonctionner les touches du clavier pour régler le rétro-éclairage de l'​écran : ajouter le paramètre noyau **acpi_osi=** au niveau de grub et ajouter le fichier /​usr/​share/​X11/​xorg.conf.d/​20-intel.conf avec le contenu décrit [[http://​silvanix.com/​blog-detail/​11/​Fix-Brightness-Control-Not-Working-for-Ubuntu-14.04|ici]].\\ Pour optimiser très légèrement la consommation d'​énergie,​ ajouter le paramètre noyau **pcie_aspm=force** au niveau de grub.\\ Le reste du support matériel est excellent sans action particulière (wifi, bluetooth, veille, rétro-éclairage du clavier, son, clicpad) |+| UX303UA-R4107T |  {{:​icons:​ok_64.png|64 bits}} | 16.04 | Installation en mode EFI de Ubuntu **[[:​xenial|16.04]]** 64 bits tout seul (Windows 10 préinstallé à été viré, après [[https://​bons-constructeurs-ordinateurs.info/​|demande de remboursement de l'OS à Asus]] par mail (59€)).\\ Pour faire fonctionner les touches du clavier pour régler le rétro-éclairage de l'​écran : ajouter le paramètre noyau **acpi_osi=** au niveau de grub et ajouter le fichier /​usr/​share/​X11/​xorg.conf.d/​20-intel.conf avec le contenu décrit [[http://​silvanix.com/​blog-detail/​11/​Fix-Brightness-Control-Not-Working-for-Ubuntu-14.04|ici]].\\ Pour optimiser très légèrement la consommation d'​énergie,​ ajouter le paramètre noyau **pcie_aspm=force** au niveau de grub.\\ Le reste du support matériel est excellent sans action particulière (wifi, bluetooth, veille, rétro-éclairage du clavier, son, clicpad) |
 | UX303UA-R4178T | {{:​icons:​ok_64.png|64 bits}} | 15.10 | Installation en mode EFI de Ubuntu 15.10 64 bits sur le SSD après remboursement de la licence Windows 10. \\ Le contrôle du rétro-éclairage fonctionne mais les touches Fonction liées ne sont pas reconnues.| | UX303UA-R4178T | {{:​icons:​ok_64.png|64 bits}} | 15.10 | Installation en mode EFI de Ubuntu 15.10 64 bits sur le SSD après remboursement de la licence Windows 10. \\ Le contrôle du rétro-éclairage fonctionne mais les touches Fonction liées ne sont pas reconnues.|
 | UX303UA-R4221E | {{:​icons:​ok_64.png|64 bits}} | 16.10 | Installation en dual-boot au côté de Windows 10. \\ Pour faire fonctionner les touches gérant la luminosité fn+f5 et fn+f6, éditer le fichier /​etc/​default/​grub et remplacer la ligne GRUB_CMDLINE_LINUX_DEFAULT="​quiet splash acpi_osi=Linux acpi_backlight=vendor"​ par GRUB_CMDLINE_LINUX_DEFAULT="​pcie_aspm=force acpi_osi=",​ puis exécuter sudo update-grub dans un terminal et redémarrer.\\ Pour gérer la résolution d'un second écran, ajouter au fichier /​usr/​share/​X11/​xorg.conf.d/​20-intel.conf les lignes <​code>​ Section "​Device"​ | UX303UA-R4221E | {{:​icons:​ok_64.png|64 bits}} | 16.10 | Installation en dual-boot au côté de Windows 10. \\ Pour faire fonctionner les touches gérant la luminosité fn+f5 et fn+f6, éditer le fichier /​etc/​default/​grub et remplacer la ligne GRUB_CMDLINE_LINUX_DEFAULT="​quiet splash acpi_osi=Linux acpi_backlight=vendor"​ par GRUB_CMDLINE_LINUX_DEFAULT="​pcie_aspm=force acpi_osi=",​ puis exécuter sudo update-grub dans un terminal et redémarrer.\\ Pour gérer la résolution d'un second écran, ajouter au fichier /​usr/​share/​X11/​xorg.conf.d/​20-intel.conf les lignes <​code>​ Section "​Device"​
Ligne 515: Ligne 551:
 | UX305CA-FC170T | {{:​icons:​ok_64.png|64 bits}} | 16.04 | Installation en mode EFI de Ubuntu 16.04 64 bits sur le SSD entier en attente de remboursement de la licence Windows 10 (59€). Tout fonctionne parfaitement tout de suite.| | UX305CA-FC170T | {{:​icons:​ok_64.png|64 bits}} | 16.04 | Installation en mode EFI de Ubuntu 16.04 64 bits sur le SSD entier en attente de remboursement de la licence Windows 10 (59€). Tout fonctionne parfaitement tout de suite.|
 | UX305FA-FB003P | {{:​icons:​ok_64.png|64 bits}} ​ | 15.04 | Démarrage en mode EFI d'​Ubuntu 14.10 64 bits à partir d'une clé USB live. Menu de démarrage : choix tester ou installer Ubuntu, puis après avoir choisi rien ne se passe... :?:\\ Par contre, l'​installation de Ubuntu 15.04 64 bits fonctionne : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=20470491#​p20470491|philinte]]| | UX305FA-FB003P | {{:​icons:​ok_64.png|64 bits}} ​ | 15.04 | Démarrage en mode EFI d'​Ubuntu 14.10 64 bits à partir d'une clé USB live. Menu de démarrage : choix tester ou installer Ubuntu, puis après avoir choisi rien ne se passe... :?:\\ Par contre, l'​installation de Ubuntu 15.04 64 bits fonctionne : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=20470491#​p20470491|philinte]]|
-| UX305FA-FB033H | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Windows 8.1 préinstallé a été viré. Installation en mode EFI de Ubuntu 15.04 64 bits (qui vient avec le noyau 3.19.0-x) : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1861011|Berte666]] ​ |+| UX305FA-FB033H | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Windows 8.1 préinstallé a été viré. Installation en mode EFI de Ubuntu 15.04 64 bits (qui vient avec le noyau 3.19.0-x) : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1861011|Berte666]] ​ |
 | UX305LA-FB011T | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Windows 10 préinstallé a été viré. Installation en mode EFI de Ubuntu 15.04 64 bits , Fonctionnement global OK : Petit problème avec le retour de veille sur le LAN via USB mais Ok sur le Wifi . Réglage luminosité ne fonctionne qu'au travers du panneau de configuration mais pas des touches de fonction , attention pas de retro-éclairage clavier sur ce modèle par ailleurs upgradable (Ram, SSD) , modèle dispo en Février 2016 | | UX305LA-FB011T | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Windows 10 préinstallé a été viré. Installation en mode EFI de Ubuntu 15.04 64 bits , Fonctionnement global OK : Petit problème avec le retour de veille sur le LAN via USB mais Ok sur le Wifi . Réglage luminosité ne fonctionne qu'au travers du panneau de configuration mais pas des touches de fonction , attention pas de retro-éclairage clavier sur ce modèle par ailleurs upgradable (Ram, SSD) , modèle dispo en Février 2016 |
 | UX305FA-FC007H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Windows 8 préinstallé a été viré. Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.2 64 bits (qui vient avec le noyau 3.16). Des astuces sont nécessaires pour la luminosité : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19325441#​p19325441|Quaza]] ​ | | UX305FA-FC007H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Windows 8 préinstallé a été viré. Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.2 64 bits (qui vient avec le noyau 3.16). Des astuces sont nécessaires pour la luminosité : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19325441#​p19325441|Quaza]] ​ |
Ligne 526: Ligne 562:
 | UX32LA-R3065H | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​trusty|14.04]]** ​ | Utilisateur [[http://​forum.ubuntu-fr.org/​profile.php?​id=251|vincebel]],​ pour [[#​retro-eclairage|le problème de rétro-éclairage]] modifier grub comme suit : ''​GRUB_CMDLINE_LINUX_DEFAULT="​quiet splash acpi_osi="''​ La luminosité du clavier est toujours au maximum au démarrage, pour cela entrez la commande suivante dans un [[:​terminal]] : <​code>​sudo echo '​1'​ > /​sys/​devices/​platform/​asus-nb-wmi/​leds/​asus\:​\:​kbd_backlight/​brightness</​code>​ | | UX32LA-R3065H | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​trusty|14.04]]** ​ | Utilisateur [[http://​forum.ubuntu-fr.org/​profile.php?​id=251|vincebel]],​ pour [[#​retro-eclairage|le problème de rétro-éclairage]] modifier grub comme suit : ''​GRUB_CMDLINE_LINUX_DEFAULT="​quiet splash acpi_osi="''​ La luminosité du clavier est toujours au maximum au démarrage, pour cela entrez la commande suivante dans un [[:​terminal]] : <​code>​sudo echo '​1'​ > /​sys/​devices/​platform/​asus-nb-wmi/​leds/​asus\:​\:​kbd_backlight/​brightness</​code>​ |
 | UX32VD-R4002V | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple d'​installation de Ubuntu en mode UEFI sur le disque dur 500 Go : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11693961#​p11693961|Abyssin]]. Exemple pour Ubuntu 12.10 : voir post [[http://​forum.ubuntu;​-fr.org/​viewtopic.php?​id=1076751|malain]]. Il semble également possible d'​installer Ubuntu sur le SSD si on en croit cette page de[[http://​www.linlap.com/​asus_ux32vd|LinLap]] | | UX32VD-R4002V | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple d'​installation de Ubuntu en mode UEFI sur le disque dur 500 Go : voir post [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11693961#​p11693961|Abyssin]]. Exemple pour Ubuntu 12.10 : voir post [[http://​forum.ubuntu;​-fr.org/​viewtopic.php?​id=1076751|malain]]. Il semble également possible d'​installer Ubuntu sur le SSD si on en croit cette page de[[http://​www.linlap.com/​asus_ux32vd|LinLap]] |
 +| UX325J \\ ZenBook | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Exemple d'​installation en mode EFI sans dual-boot : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2066758|Gari]]. |
 | UX330UA-FB018R | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | installation en mode EFI de Ubuntu 16.04.1 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1997084|pingouinux]]| | UX330UA-FB018R | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | installation en mode EFI de Ubuntu 16.04.1 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1997084|pingouinux]]|
 | UX330CA-FC030T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | idem [[UX330UA-FB018R|emilien]]| | UX330CA-FC030T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | idem [[UX330UA-FB018R|emilien]]|
 | UX331F(ZENBOOK) | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** |Installation Ubuntu 18.04 en dual boot EFI. Nécessite une mise à jour du bios après la mise à jour de la version UBUNTU ​ [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22171799#​p22171799|jbp]]| | UX331F(ZENBOOK) | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** |Installation Ubuntu 18.04 en dual boot EFI. Nécessite une mise à jour du bios après la mise à jour de la version UBUNTU ​ [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22171799#​p22171799|jbp]]|
 +| UX331UN | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** |Installation en mode EFI de Ubuntu 20.04 seul dans l'ordi : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2072028|indie]] |
 | UX333FN-A4036T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | installation en mode EFI de Ubuntu 18.04.2 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2036849|jfbenat]]| | UX333FN-A4036T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | installation en mode EFI de Ubuntu 18.04.2 64 bits en dual-boot avec Windows 10 préinstallé : voir post [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2036849|jfbenat]]|
 | UX333FA-A4042T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI d'​Ubuntu MATE 18.04.3 64 bits, Windows 10 préinstallé s'est fait virer. Mettre à jour le bios (version 307 dans mon cas).| | UX333FA-A4042T | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode EFI d'​Ubuntu MATE 18.04.3 64 bits, Windows 10 préinstallé s'est fait virer. Mettre à jour le bios (version 307 dans mon cas).|
Ligne 536: Ligne 574:
 | UX434DA-UM433DA \\ ZenBook 14 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[focal|20.04]]** |Boot en version 20.04LTS très aléatoire si le bios n'est pas à jour. Plus de soucis constaté après mise à jour en version 302. Pas de support du numpad ELAN intégré au touchpad (Kernel 5.4.0-29-generic). Mise en veille impossible | | UX434DA-UM433DA \\ ZenBook 14 | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[focal|20.04]]** |Boot en version 20.04LTS très aléatoire si le bios n'est pas à jour. Plus de soucis constaté après mise à jour en version 302. Pas de support du numpad ELAN intégré au touchpad (Kernel 5.4.0-29-generic). Mise en veille impossible |
 | UX461FA-E1059T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de la variante mentholée de Ubuntu 18.04 64 bits en dual-boot avec Windows 10 préinstallé. Le paramètre de noyau **dis_ucode_ldr** est nécessaire : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2046359|bengi40]] ​ | | UX461FA-E1059T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de la variante mentholée de Ubuntu 18.04 64 bits en dual-boot avec Windows 10 préinstallé. Le paramètre de noyau **dis_ucode_ldr** est nécessaire : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2046359|bengi40]] ​ |
-| UX480FD-BE027T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.2 64 bits en dual-boot avec Windows 10 préinstallé ; le screenpad n'est pas fonctionnel : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2041534|Heero84]] ​ |+| UX463FA-AI030T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​focal|20.04]]** | Installation en mode EFI de Ubuntu 20.04 en dual-boot avec Windows 10 préinstallé. Il faut désactiver Optane H10 depuis Windows : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22571176#​p22571176|bouchra24]] ​ | 
 +| UX480FD-BE027T | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04]]** | Installation en mode EFI de Ubuntu 18.04.2 64 bits en dual-boot avec Windows 10 préinstallé ; le screenpad n'est pas fonctionnel : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2041534|Heero84]] ​ |
 | UX50v |  {{:​icons:​ok_64.png|64 bits}} | 10.04 |  | | UX50v |  {{:​icons:​ok_64.png|64 bits}} | 10.04 |  |
 | UX51A | {{:​icons:​ok_64.png|64 bits}} | 12.10 | Plus de détails sur le forum voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11794051#​p11794051|ce post]]. | | UX51A | {{:​icons:​ok_64.png|64 bits}} | 12.10 | Plus de détails sur le forum voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=11794051#​p11794051|ce post]]. |
Ligne 568: Ligne 607:
  
 ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^ ^ Modèle ^ État ^ Versions ^ Matériels non supportés / Résolutions ^
-| X102BA | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Windows 8 préinstallé écrasé par l'​installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** (en développement) : voir exemple de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1500001|sethy ]] |+| X102BA | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Windows 8 préinstallé écrasé par l'​installation en mode EFI de Ubuntu **[[:​trusty|14.04]]** (en développement) : voir exemple de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1500001|sethy ]] |
 | X102BA-DF028H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** |Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.2 64 bits en dual-boot avec Windows 8.1 préinstallé : exemple de[[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19275341#​p19275341|Paikan27]] | | X102BA-DF028H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** |Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.2 64 bits en dual-boot avec Windows 8.1 préinstallé : exemple de[[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19275341#​p19275341|Paikan27]] |
 +| X200CA | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 13.10 | Désactiver le [[:​desactiver_secure_boot|secure boot]]. |
 +| Vivobook X1704ZA-S1704ZA-BX016W | {{:​icons:​ok_64.png|64 bits}} | **[[:​jammy|22.04]]** |Installer en mode EFI et désactiver le Secure boot |
 | X200CA | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 13.10 | Désactiver le [[:​desactiver_secure_boot|secure boot]]. | | X200CA | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 13.10 | Désactiver le [[:​desactiver_secure_boot|secure boot]]. |
 | X200CA-CT047H | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 14.10 | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 8.1 préinstallé : exemple de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=18285321#​p18285321|BRAHIMA]] ​ | | X200CA-CT047H | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 14.10 | Installation en mode EFI de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en dual-boot avec Windows 8.1 préinstallé : exemple de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=18285321#​p18285321|BRAHIMA]] ​ |
Ligne 582: Ligne 623:
 | X302L | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​xenial|16.04]]** | Tout fonctionne out of the box, UEFI géré par Ubuntu automatiquement | | X302L | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​xenial|16.04]]** | Tout fonctionne out of the box, UEFI géré par Ubuntu automatiquement |
 | X302LJ | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​xenial|16.04]]** | L'​interface Wifi Broadcom Corporation BCM43142 802.11b/g/n ne possède pas de pilote libre. ​ L'​installation peut se faire par l'​interface Ethernet et le pilote propriétaire Wifi Broadcom peut s'​installer après coup dans les pilotes additionnels. Penser à désactiver Secure Boot UEFI si vous installez le pilote propriétaire NVidia. Sinon tout fonctionne et l'UEFI est bien géré par Ubuntu automatiquement | | X302LJ | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​xenial|16.04]]** | L'​interface Wifi Broadcom Corporation BCM43142 802.11b/g/n ne possède pas de pilote libre. ​ L'​installation peut se faire par l'​interface Ethernet et le pilote propriétaire Wifi Broadcom peut s'​installer après coup dans les pilotes additionnels. Penser à désactiver Secure Boot UEFI si vous installez le pilote propriétaire NVidia. Sinon tout fonctionne et l'UEFI est bien géré par Ubuntu automatiquement |
 +| X302UA-FN037T | {{:​icons:​ok_64.png|64 bits}} ​ | **[[:​focal|20.04]]** | installation en mode EFI de Ubuntu 20.04.1 seul dans l'ordi (Windows 10 préinstallé a été viré) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22379422|
 +lamnair ]]|
 | X409UA | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | {{https://​doc.ubuntu-fr.org/​bionic| 18.04 }}|  Livré avec un bios bloqué sur IRST avec optane. Nécessite un gros bricolage pour casser la protection du bios.  Voir post de  [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2046656|MangeChats]]. Voir post de   ​[[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22256618#​p22256618|Libellul333]].| | X409UA | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | {{https://​doc.ubuntu-fr.org/​bionic| 18.04 }}|  Livré avec un bios bloqué sur IRST avec optane. Nécessite un gros bricolage pour casser la protection du bios.  Voir post de  [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2046656|MangeChats]]. Voir post de   ​[[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22256618#​p22256618|Libellul333]].|
 | X412D | {{:​icons:​ok_64.png|64 bits}} | 20.04 | tout est OK sur secteur, mettre à jour le kernel en version 5.6 pour fonctionnnement sur batterie sinon écran noir au démarrage de xubuntu. Par contre le pavé numérique du touchpad ne fonctionne pas | | X412D | {{:​icons:​ok_64.png|64 bits}} | 20.04 | tout est OK sur secteur, mettre à jour le kernel en version 5.6 pour fonctionnnement sur batterie sinon écran noir au démarrage de xubuntu. Par contre le pavé numérique du touchpad ne fonctionne pas |
 +| X413F | {{:​icons:​ok_64.png|64 bits}} | 20.04.1 | Installation sans problème. Boot totalement impossible. Il est nécessaire de déactiver l'​accès RAID et de mettre le mode AHCI voir post de[[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2055725|Rene B ]]  |
 +| X415/X415E | {{:​icons:​ok_64.png|64 bits}} | 22.04 | Ne se met pas vraiment en veille lorsque le capot est rabattu ou lorsque l'on clique sur la mise en veille. Il faudrait activer [[tutoriel/​activer_hibernation|l’hibernation]] pour avoir quelque chose de satisfaisant. Cependant l'​option ne sera pas présente dans les paramètres d'​energie. |
 | X42F | {{:​icons:​ok_64.png|64 bits}} | 10.10 | Sortie audio \\ tout est OK sous maverick mais l'​affichage ne fonctionne qu'​après mise à jour des paquets (donc en ligne de commande...) | | X42F | {{:​icons:​ok_64.png|64 bits}} | 10.10 | Sortie audio \\ tout est OK sous maverick mais l'​affichage ne fonctionne qu'​après mise à jour des paquets (donc en ligne de commande...) |
 | X43SV-SV169V | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Consultez la documentation associée au modèle X53SV-SX200V | | X43SV-SV169V | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Consultez la documentation associée au modèle X53SV-SX200V |
Ligne 589: Ligne 634:
 | X456UB | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04.1]]** | Problème d'​affichage voir ici : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2034402]] Attention, ce modèle peut porter une étiquette constructeur indiquant la référence K456U| | X456UB | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​bionic|18.04.1]]** | Problème d'​affichage voir ici : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2034402]] Attention, ce modèle peut porter une étiquette constructeur indiquant la référence K456U|
 | X50R-AP136C | {{:​icons:​ok_32.png|32 bits}} |**[[:​trusty|14.04]]** | [[http://​www.linux-projects.org/​modules/​mydownloads/​|webcam]] | | X50R-AP136C | {{:​icons:​ok_32.png|32 bits}} |**[[:​trusty|14.04]]** | [[http://​www.linux-projects.org/​modules/​mydownloads/​|webcam]] |
-| X50SL | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} |8.04 | audio, ethernet, l'​audio fonctionne après l'​ajout de options snd-hda-intel model=lenovo dans le fichier /​etc/​modprobe.d/​alsa-base |+| X50SL | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} |8.04 | audio**Gras**, ethernet, l'​audio fonctionne après l'​ajout de options snd-hda-intel model=lenovo dans le fichier /​etc/​modprobe.d/​alsa-base |
 | X50VL-AP017C | {{:​icons:​ok_32.png|32 bits}} | 10.10 | [[:​Maverick]] : activation du WiFi avec le bouton sur la gauche du portable et avec la combinaison de touches ''​FN + F2''​.| | X50VL-AP017C | {{:​icons:​ok_32.png|32 bits}} | 10.10 | [[:​Maverick]] : activation du WiFi avec le bouton sur la gauche du portable et avec la combinaison de touches ''​FN + F2''​.|
-| X501A | {{:​icons:​ok_64.png|64 bits}} | 13.10 |idem X55V (installer en mode UEFI). |+| X501A | {{:​icons:​ok_64.png|64 bits}} | 13.10 |idem X55V (installer en mode UEFI).
 +| X512J | {{:​icons:​ok_64.png|64 bits}} | **[[:​jammy|22.04]]** | Le nvme n'est pas vu. Nécessité de passer en **AHCI**. Voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22669372#​p22669372|Nanoo]] | 
 +| X515MA | {{:​icons:​ok_64.png|64 bits}} | **[[:​jammy|22.04]]** | voir discussion ​ https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22635265#​p22635265 ​|
 | X51L | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | WiFi (résolu versions récentes) | | X51L | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | WiFi (résolu versions récentes) |
 | X51R | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | - | | X51R | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | - |
Ligne 606: Ligne 653:
 | X55V | {{:​icons:​ok_64.png|64 bits}} ​ | 12.10 | Windows 8 est pré-installé en mode UEFI et il convient d'​installer également Ubuntu 12.10 [[:​uefi#​installer_ubuntu_en_mode_efi|en mode UEFI]] ( [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=12661961#​p12661961|post de Nohlan19]] ) | | X55V | {{:​icons:​ok_64.png|64 bits}} ​ | 12.10 | Windows 8 est pré-installé en mode UEFI et il convient d'​installer également Ubuntu 12.10 [[:​uefi#​installer_ubuntu_en_mode_efi|en mode UEFI]] ( [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=12661961#​p12661961|post de Nohlan19]] ) |
 | X540 | {{:​icons:​ok_64.png|64 bits}} | 16.04 | Installé en uefi avec Windows 10, secure boot desactivé. | | X540 | {{:​icons:​ok_64.png|64 bits}} | 16.04 | Installé en uefi avec Windows 10, secure boot desactivé. |
-| X540BA-DM368T | {{:​icons:​ok_64.png|64 bits}} | **[[:​eoan|19.10]]** | Installation en mode uefi de Ubuntu 19.10 64 bits en dual-boot avec Windows 10 préinstallé,​ secure boot laissé activé : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2051277|dupont08]] |+| X540BA-DM368T | {{:​icons:​ok_64.png|64 bits}} | **[[:​eoan|19.10]]** | Installation en mode uefi de Ubuntu 19.10 64 bits en dual-boot avec Windows 10 préinstallé,​ secure boot laissé activé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2051277|dupont08]] |
 | X541UA-DM1499T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode uefi de Ubuntu 16.04.3 64 bits en dual-boot avec Windows 10 préinstallé,​ secure boot laissé activé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020523|marc_ch]] | | X541UA-DM1499T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode uefi de Ubuntu 16.04.3 64 bits en dual-boot avec Windows 10 préinstallé,​ secure boot laissé activé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2020523|marc_ch]] |
-| X541UA-GO922TC | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode uefi de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 préinstallé,​ secure boot désactivé. Utilisation impérative du paramètre de noyau **pci=noaer** avant et après l'​installation de Ubuntu : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2046981|Feyn]] | +| X541UA-GO922TC | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | Installation en mode uefi de Ubuntu 18.04.1 64 bits en dual-boot avec Windows 10 préinstallé,​ secure boot désactivé. Utilisation impérative du paramètre de noyau **pci=noaer** avant et après l'​installation de Ubuntu : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2046981|Feyn]] | 
-| X541UA-XX532T | {{:​icons:​ok_64.png|64 bits}} | [[:​eoan|19.10]] | Installation en mode uefi de Ubuntu 19.10 64 bits en dual-boot avec Windows 10 préinstallé,​ Utilisation impérative du paramètre de noyau **pci=noaer** : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2050174|robloch]] |+| X541UA-XX532T | {{:​icons:​ok_64.png|64 bits}} | [[:​eoan|19.10]] | Installation en mode uefi de Ubuntu 19.10 64 bits en dual-boot avec Windows 10 préinstallé,​ Utilisation impérative du paramètre de noyau **pci=noaer** : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2050174|robloch]] |
 | X550C | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | ****[[:​trusty|14.04]]**:​** en dual-boot avec truc8 en UEFI. L'​activation du Wi-Fi est bloquée, Il suffit d'​éditer **/​etc/​modprobe.d/​blacklist.conf** et d'y ajouter **blacklist asus_nb_wmi** et de redémarrer | | X550C | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | ****[[:​trusty|14.04]]**:​** en dual-boot avec truc8 en UEFI. L'​activation du Wi-Fi est bloquée, Il suffit d'​éditer **/​etc/​modprobe.d/​blacklist.conf** et d'y ajouter **blacklist asus_nb_wmi** et de redémarrer |
 | X550CC | {{:​icons:​ok_64.png|64 bits}} wifi : {{icons:​process-stop.png}} | **[[:​trusty|14.04]]** | ****[[:​trusty|14.04]]**:​** en dual-boot avec truc8 en UEFI. La désactivation du Wi-Fi est bloquée, Il suffit d'​éditer **/​etc/​modprobe.d/​blacklist.conf** et d'y ajouter **blacklist asus_nb_wmi** et de redémarrer | | X550CC | {{:​icons:​ok_64.png|64 bits}} wifi : {{icons:​process-stop.png}} | **[[:​trusty|14.04]]** | ****[[:​trusty|14.04]]**:​** en dual-boot avec truc8 en UEFI. La désactivation du Wi-Fi est bloquée, Il suffit d'​éditer **/​etc/​modprobe.d/​blacklist.conf** et d'y ajouter **blacklist asus_nb_wmi** et de redémarrer |
 | X550LB-XO122H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | "​Secure Boot" désactivé dans le "​Bios"​. Windows 8 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu **[[:​trusty|14.04]]** en mode EFI : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17662991#​p17662991|post de didier-boris]] | | X550LB-XO122H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | "​Secure Boot" désactivé dans le "​Bios"​. Windows 8 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu **[[:​trusty|14.04]]** en mode EFI : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=17662991#​p17662991|post de didier-boris]] |
 | X550LB-XO030H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Windows 8 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu 13.10 64 bits en mode EFI. A noter : la "​Réparation recommandée"​ de Boot-Repair (avec "​backup-and-rename-efi-files"​ activé) a été utilisée : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16436931#​p16436931|post de Tib0]] | | X550LB-XO030H | {{:​icons:​ok_64.png|64 bits}} | 13.10 | Windows 8 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu 13.10 64 bits en mode EFI. A noter : la "​Réparation recommandée"​ de Boot-Repair (avec "​backup-and-rename-efi-files"​ activé) a été utilisée : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=16436931#​p16436931|post de Tib0]] |
-| X550LDV-XX505H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Windows 8.1 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en mode EFI : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1770981|post de piewyz]] | +| X550LDV-XX505H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Windows 8.1 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en mode EFI : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1770981|post de piewyz]] | 
-| X550LN-XO033H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Windows 8 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu **[[:​trusty|14.04]]** 64 bits en mode EFI : voir [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1606961|post de LeLorrain]] | +| X550LN-XO033H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Windows 8 est pré-installé en mode UEFI. Installation en dual-boot de Ubuntu **[[:​trusty|14.04]]** 64 bits en mode EFI : voir [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1606961|post de LeLorrain]] | 
-| X551MA-SX1029H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** |Installation en mode EFI de Ubuntu 16.04.1 64 bits seul dans l'ordi (Windows 8.1 pré-installé s'est fait virer). Pb non-résolu avec la luminosité : voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=2002733|Maxwelinux]] |+| X551MA-SX1029H | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** |Installation en mode EFI de Ubuntu 16.04.1 64 bits seul dans l'ordi (Windows 8.1 pré-installé s'est fait virer). Pb non-résolu avec la luminosité : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2002733|Maxwelinux]] |
 | X552E | {{:​icons:​ok_64.png|64 bits}} | 19.10 |  | | X552E | {{:​icons:​ok_64.png|64 bits}} | 19.10 |  |
 | [[:​asus_r511lj|X555LJ]] | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | | | [[:​asus_r511lj|X555LJ]] | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | |
 | [[:​asus_x555|X555]] | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​trusty|14.04]]** | Windows 8.1 est pré-installé en mode UEFI. Touches fn inopérantes. touchpad hyper sensible | | [[:​asus_x555|X555]] | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​trusty|14.04]]** | Windows 8.1 est pré-installé en mode UEFI. Touches fn inopérantes. touchpad hyper sensible |
 | [[:​asus_x555ba|X555BA]] | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​xenial|16.04]]** | Windows 10 est pré-installé en mode UEFI. installer xenial 16.04.1 et non 16.04.3 | | [[:​asus_x555ba|X555BA]] | {{:​wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​xenial|16.04]]** | Windows 10 est pré-installé en mode UEFI. installer xenial 16.04.1 et non 16.04.3 |
 +| [[:​asus_x555|X555LD]] | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Fonctionne parfaitement,​ voir https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2069250 |
 | X56TR | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 9.04 | - | | X56TR | {{:​icons:​ok_32_64.png|32 et 64 bits}} | 9.04 | - |
 | X57VC | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.04 |[[:​retro-eclairage#​pour_portable_asus|configuration de la luminosité]] | | X57VC | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.04 |[[:​retro-eclairage#​pour_portable_asus|configuration de la luminosité]] |
 | X57VN-AP046C | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.04 | audio | | X57VN-AP046C | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 9.04 | audio |
 +| X570ZD | {{:​icons:​ok_64.png|64 bits}} | **[[:​focal|20.04]]** | Fonctionne parfaitement,​ vidéos : désactiver secur boot : https://​youtu.be/​stH0H_bDcRw ​ _ installation : https://​youtu.be/​Mp_GbkBRGBw |
 | X59SL | {{:​icons:​ok_64.png|64 bits}} | 12.10 | [[:​utilisateurs:​laurentb|Laurent Bellegarde]] [[:​utilisateurs:​pilepoil|Pilepoil]] Asus propose 40 euros de remboursement. Pour télécharger le formulaire de remboursement,​ suivez ce [[http://​laurent.bellegarde.free.fr/​licences_OEM/​procedure_remboursement_asus_carrefour3.jpg|lien]]. | | X59SL | {{:​icons:​ok_64.png|64 bits}} | 12.10 | [[:​utilisateurs:​laurentb|Laurent Bellegarde]] [[:​utilisateurs:​pilepoil|Pilepoil]] Asus propose 40 euros de remboursement. Pour télécharger le formulaire de remboursement,​ suivez ce [[http://​laurent.bellegarde.free.fr/​licences_OEM/​procedure_remboursement_asus_carrefour3.jpg|lien]]. |
 | X5DIE | {{:​icons:​ok_64.png|64 bits}} | 9.10 | Pour la webcam inversé suivre [[:​asus_n82jq#​affichage_webcam_inverse|cette solution]] | | X5DIE | {{:​icons:​ok_64.png|64 bits}} | 9.10 | Pour la webcam inversé suivre [[:​asus_n82jq#​affichage_webcam_inverse|cette solution]] |
-| X5DIJ | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Test effectué en 64bits. \\ Le son fonctionne après avoir suivi [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=2826089|la méthode indiquée par Erdnal]], à savoir : \\ 1) Télécharger le dossier [[http://​www.megaupload.com/?​d=THJMRYIL]] et décompressez-le. \\ 2) Aller dans Système>​Préférences>​Applications au démarrage. \\ 3) Cliquer sur **Ajouter** et ajouter l'​entrée **sudo '/​home/​user/​hda-analyzer/​hda_analyzer.py'​** \\ 4) Redémarrez. | +| X5DIJ | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Test effectué en 64bits. \\ Le son fonctionne après avoir suivi [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=2826089|la méthode indiquée par Erdnal]], à savoir : \\ 1) Télécharger le dossier [[http://​www.megaupload.com/?​d=THJMRYIL]] et décompressez-le. \\ 2) Aller dans Système>​Préférences>​Applications au démarrage. \\ 3) Cliquer sur **Ajouter** et ajouter l'​entrée **sudo '/​home/​user/​hda-analyzer/​hda_analyzer.py'​** \\ 4) Redémarrez. | 
-| X5DIN-SX033C | {{:​icons:​ok_32.png|32 bits}} | 10.04 | Pour [[:Lucid]] : [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=393246|fonction vidéo 3D]] |+| X5DIN-SX033C | {{:​icons:​ok_32.png|32 bits}} | 10.04 | Pour [[:Lucid]] : [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=393246|fonction vidéo 3D]] |
 | X5EAC | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | [[:​webcam#​webcam_a_l_envers|image webcam à l'​envers]] | | X5EAC | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.10 | [[:​webcam#​webcam_a_l_envers|image webcam à l'​envers]] |
 +| X61SL | {{:​icons:​ok_64.png|64 bits}} | 22.04 |Ajouter options **nomodeset ​ acpi=off noapic** pour installer et utiliser voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2076757|finepix]].| ​
 | X61SV | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** 18.04 | Sous Trusty avant installation [[#Avant installation|suivez les instructions plus haut.]] Sous 18.04 option nomodeset et acpi=off au démarrage.| ​ | X61SV | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** 18.04 | Sous Trusty avant installation [[#Avant installation|suivez les instructions plus haut.]] Sous 18.04 option nomodeset et acpi=off au démarrage.| ​
 | X66IC-JX003V |  {{:​icons:​ok_32.png|32 bits}} | 10.04 | microphone | | X66IC-JX003V |  {{:​icons:​ok_32.png|32 bits}} | 10.04 | microphone |
Ligne 642: Ligne 692:
 | X70S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | [[:​webcam#​webcam_a_l_envers|image webcam à l'​envers]] | | X70S | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | [[:​webcam#​webcam_a_l_envers|image webcam à l'​envers]] |
 | X70SR-7S042C | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | L'​audio fonctionne après l'​ajout de options ''​snd-hda-intel model=lenovo''​ et ''​options snd-hda-intel probe_mask=1''​ dans le fichier ''/​etc/​modprobe.d/​alsa-base''​ | | X70SR-7S042C | {{:​icons:​edit-clear.png?​32|Information obsolète}} {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 8.04 | L'​audio fonctionne après l'​ajout de options ''​snd-hda-intel model=lenovo''​ et ''​options snd-hda-intel probe_mask=1''​ dans le fichier ''/​etc/​modprobe.d/​alsa-base''​ |
 +| X712JA | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | **[[:​focal|20.04.3]]** | Série VivoBook. Installation Kubuntu 20.04 en dual-boot avec Windows 10 préinstallé en mode UEFI : installation pénible (pour une non-spé en tout cas) ; mais tout fonctionne ensuite. 3 Options BIOS à modifier : FAST BOOT et SECURE BOOT DISABLED ; options SATA : passer en AHCI (sinon l'​installeur ne voyait pas mon DD) [[https://​support.thinkcritical.com/​kb/​articles/​switch-windows-10-from-raid-ide-to-ahci/​|en suivant cette méthode pour conserver un Win fonctionnel]]. |
 | X71Q | {{:​icons:​ok_32.png|32 bits}} | 10.04 | - | | X71Q | {{:​icons:​ok_32.png|32 bits}} | 10.04 | - |
 | X71SL | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​precise|12.04]]** **[[:​zesty|17.04]]** | Impossible de démarrer sur un CD 10.10 sans ajouter acpi=off. Avant installation [[#Avant installation|suivez les instructions plus haut.]] \\ 1) Pour permettre l'​arrêt du PC par la fonction "​Eteindre...",​ j'ai dû ajouter ''​acpi=force''​ \\ 2) Pour permettre le redémarrage du PC par la fonction "​Redémarrer...",​ j'ai dû ajouter ''​reboot=acpi''​ | | X71SL | {{:​icons:​ok_32_64.png|32 et 64 bits}} | **[[:​precise|12.04]]** **[[:​zesty|17.04]]** | Impossible de démarrer sur un CD 10.10 sans ajouter acpi=off. Avant installation [[#Avant installation|suivez les instructions plus haut.]] \\ 1) Pour permettre l'​arrêt du PC par la fonction "​Eteindre...",​ j'ai dû ajouter ''​acpi=force''​ \\ 2) Pour permettre le redémarrage du PC par la fonction "​Redémarrer...",​ j'ai dû ajouter ''​reboot=acpi''​ |
 | X71SL | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | mode live ajouter ''​nomodeset''​ Démarrages normaux ajouter ''​nolapic acpi=force''​ \\ Autre possibilité pour les démarrages normaux avec les paramètres ​ ''​nomodeset modprobe.blacklist=nouveau vga=359''​ Voir le post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22293571#​p22293571|Marin5966 ]]  | | X71SL | {{:​icons:​ok_64.png|64 bits}} | **[[:​bionic|18.04]]** | mode live ajouter ''​nomodeset''​ Démarrages normaux ajouter ''​nolapic acpi=force''​ \\ Autre possibilité pour les démarrages normaux avec les paramètres ​ ''​nomodeset modprobe.blacklist=nouveau vga=359''​ Voir le post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​pid=22293571#​p22293571|Marin5966 ]]  |
 | X71SR | {{:​icons:​edit-clear.png?​32|Information obsolète}} [[:Gutsy]] {{:​icons:​ok_32.png|32 bits}} | 8.04 | - | | X71SR | {{:​icons:​edit-clear.png?​32|Information obsolète}} [[:Gutsy]] {{:​icons:​ok_32.png|32 bits}} | 8.04 | - |
-| X72D | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 | [[:​utilisateurs:​Willty]] Pour le touchpad [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=414013|suivre ce post]] |+| X72D | {{wiki:​modeles:​laptop_work.png|Fonctionne après config}} | 10.04 | [[:​utilisateurs:​Willty]] Pour le touchpad [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=414013|suivre ce post]] |
 | X72JK | {{:​icons:​ok_64.png|64 bits}} | 10.04 | - | | X72JK | {{:​icons:​ok_64.png|64 bits}} | 10.04 | - |
 | X72JR | {{:​icons:​ok_64.png|64 bits}} | 11.10 | microphone à activer dans les préférences | | X72JR | {{:​icons:​ok_64.png|64 bits}} | 11.10 | microphone à activer dans les préférences |
-| X751LAV-TY481T | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1969471|filipino]] : installation de Ubuntu 14.04.3 64 bits en mode EFI en dual-boot avec Windows 10 préinstallé. Secure Boot désactivé. Démarrage rapide de windows 10 désactivé|+| X751LAV-TY481T | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1969471|filipino]] : installation de Ubuntu 14.04.3 64 bits en mode EFI en dual-boot avec Windows 10 préinstallé. Secure Boot désactivé. Démarrage rapide de windows 10 désactivé|
 | X751LD | {{:​icons:​ok_64.png|64 bits}} | 20.04 | discution: [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2053124]] : installation de Ubuntu 20.04 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé. bios: Secure Boot désactivé,​ Fast boot désactivé,​ tout fonctionne sauf bluetooth| | X751LD | {{:​icons:​ok_64.png|64 bits}} | 20.04 | discution: [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2053124]] : installation de Ubuntu 20.04 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé. bios: Secure Boot désactivé,​ Fast boot désactivé,​ tout fonctionne sauf bluetooth|
 | X751LDV-TY127H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19012141#​p19012141|fjames87]] : installation de Ubuntu 14.10 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé. Secure Boot désactivé. Démarrage rapide de windows 8.1 désactivé| | X751LDV-TY127H | {{:​icons:​ok_64.png|64 bits}} | 14.10 | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=19012141#​p19012141|fjames87]] : installation de Ubuntu 14.10 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé. Secure Boot désactivé. Démarrage rapide de windows 8.1 désactivé|
 | X751LDV-TY140H | {{:​icons:​ok_64.png|64 bits}} | 15.10 | Désactivez Secure Boot. Installation de Ubuntu 15.10 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé selon [[http://​libreaquimperle.blogspot.fr/​p/​efi-un-jeu-d-enfant.html|cette méthode]] en 4 étapes. Etape 5 : Upgrade W8.1 vers W10, Grub et Ubuntu toujours opérationnel. ​ | | X751LDV-TY140H | {{:​icons:​ok_64.png|64 bits}} | 15.10 | Désactivez Secure Boot. Installation de Ubuntu 15.10 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé selon [[http://​libreaquimperle.blogspot.fr/​p/​efi-un-jeu-d-enfant.html|cette méthode]] en 4 étapes. Etape 5 : Upgrade W8.1 vers W10, Grub et Ubuntu toujours opérationnel. ​ |
-| X751LN-TY045H |  {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1770211|ici]] d'une installation de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé. Secure Boot désactivé. Démarrage rapide de windows 8.1 désactivé| +| X751LN-TY045H |  {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1770211|ici]] d'une installation de Ubuntu **[[:​trusty|14.04]]**.1 64 bits en mode EFI en dual-boot avec Windows 8.1 préinstallé. Secure Boot désactivé. Démarrage rapide de windows 8.1 désactivé| 
-| X751MJ-TY005H | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Installation en mode EFI de Ubuntu 15.04 64 bits seul dans l'ordi (Windows préinstallé a été viré). Secure Boot désactivé. Voir post de [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1908931|ceric]] |+| X751MJ-TY005H | {{:​icons:​ok_64.png|64 bits}} | 15.04 | Installation en mode EFI de Ubuntu 15.04 64 bits seul dans l'ordi (Windows préinstallé a été viré). Secure Boot désactivé. Voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1908931|ceric]] |
 | X751NA-TY011TB | {{:​icons:​ok_64.png|64 bits}} | 18.04 | Installation en EFI avec création au préalable d'une partition de 200Mo EFI pour "/​boot"​ (pas de dual-boot : W10 pré-installé écrasé sans activation). Fast Boot & Secure Boot désactivés. | | X751NA-TY011TB | {{:​icons:​ok_64.png|64 bits}} | 18.04 | Installation en EFI avec création au préalable d'une partition de 200Mo EFI pour "/​boot"​ (pas de dual-boot : W10 pré-installé écrasé sans activation). Fast Boot & Secure Boot désactivés. |
 | X751SV-TY010T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu 16.04.1 64 bits en dual-boot avec Windows 10 préinstallé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2007359|zeph22]] | | X751SV-TY010T | {{:​icons:​ok_64.png|64 bits}} | **[[:​xenial|16.04]]** | Installation en mode EFI de Ubuntu 16.04.1 64 bits en dual-boot avec Windows 10 préinstallé : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2007359|zeph22]] |
Ligne 660: Ligne 711:
 | X75V | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15497511#​p15497511|JujuLand]] : installation en mode EFI de Ubuntu **[[:​precise|12.04]]**.3 seul sur le disque dur (le Windows 8 d'​origine ayant été viré).Si problème WIFI solution ​ [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15819301|ICI]] ​ en bas de page.UEFI et Windows 8 en dual boot| | X75V | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15497511#​p15497511|JujuLand]] : installation en mode EFI de Ubuntu **[[:​precise|12.04]]**.3 seul sur le disque dur (le Windows 8 d'​origine ayant été viré).Si problème WIFI solution ​ [[http://​forum.ubuntu-fr.org/​viewtopic.php?​pid=15819301|ICI]] ​ en bas de page.UEFI et Windows 8 en dual boot|
 | X75VD | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1979071|Cybak]] : installation en mode EFI de Ubuntu 14.04.3 64 bits en dual-boot avec Windows 10 préinstallé| | X75VD | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1979071|Cybak]] : installation en mode EFI de Ubuntu 14.04.3 64 bits en dual-boot avec Windows 10 préinstallé|
-| X75VD-TY088H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=1813711|Schuylinx]] : installation en mode EFI de Ubuntu 14.04.1 64 bits en dual-boot avec Windows 8 préinstallé|+| X75VD-TY088H | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** | Exemple [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=1813711|Schuylinx]] : installation en mode EFI de Ubuntu 14.04.1 64 bits en dual-boot avec Windows 8 préinstallé|
 | X77VN | {{:​icons:​ok_64.png|64 bits}} | 10.10 | led wifi allumée en permanence; pas d'​entrée micro ; casque + haut parleur fonctionnent en même temps. **[[:​precise|12.04]]** corrige micro + haut parleur | | X77VN | {{:​icons:​ok_64.png|64 bits}} | 10.10 | led wifi allumée en permanence; pas d'​entrée micro ; casque + haut parleur fonctionnent en même temps. **[[:​precise|12.04]]** corrige micro + haut parleur |
 | X77J | {{:​icons:​ok_64.png|64 bits}} | 10.10 | Sauf le micro (?) | | X77J | {{:​icons:​ok_64.png|64 bits}} | 10.10 | Sauf le micro (?) |
 | X72F | {{:icons:ok 32.png|32 bits}} | 10.10 | - | | X72F | {{:icons:ok 32.png|32 bits}} | 10.10 | - |
 | X93S | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** \\ **[[:​bionic|18.04]]**| Utilise la technologie Optimus. La carte nvidia GT540M ne fonctionne donc qu'​après l'​installation de Bumblebee. Sinon la carte graphique Intel fonctionne très bien. Sous Lucid l'​écran n'est pas reconnu et la définition est très faible. Kubuntu **[[:​trusty|14.04]]** 64bit avec X93SM = tout fonctionne parfaitement,​ juste installé le pilote graphique Nvidia GT 630M 1 Gb. Ubuntu **[[:​trusty|14.04]]** 64bits : Casque Corsaire Vengeance 1500 non reconnu.\\ Tout fonctionne également avec kubuntu 18.04 (64 bits) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2043921|jajaX]] | | X93S | {{:​icons:​ok_64.png|64 bits}} | **[[:​trusty|14.04]]** \\ **[[:​bionic|18.04]]**| Utilise la technologie Optimus. La carte nvidia GT540M ne fonctionne donc qu'​après l'​installation de Bumblebee. Sinon la carte graphique Intel fonctionne très bien. Sous Lucid l'​écran n'est pas reconnu et la définition est très faible. Kubuntu **[[:​trusty|14.04]]** 64bit avec X93SM = tout fonctionne parfaitement,​ juste installé le pilote graphique Nvidia GT 630M 1 Gb. Ubuntu **[[:​trusty|14.04]]** 64bits : Casque Corsaire Vengeance 1500 non reconnu.\\ Tout fonctionne également avec kubuntu 18.04 (64 bits) : voir post de [[https://​forum.ubuntu-fr.org/​viewtopic.php?​id=2043921|jajaX]] |
-|[[:​asus_X53T|X53T/K53TA]] | {{:​icons:​ok_64.png|64 bits}} | 14.04 LTS | Des manipulations sont nécessaires pour faire fonctionner la carte graphique ​|+| X53T/K53TA | {{:​icons:​ok_64.png|64 bits}} | 14.04 LTS |  |
 ===== Z ===== ===== Z =====
  
Ligne 677: Ligne 728:
 ---- ----
  
-D'​autres informations (en anglais) sur https://​wiki.ubuntu.com/​LaptopTestingTeam/​Old/​Asus ​+D'​autres informations (en anglais) sur https://​wiki.ubuntu.com/​LaptopTestingTeam/​Old/​Asus
  
 Ajoutez les dépôts officiels ASUS : [[http://​la-vache-libre.org/​ubuntu-ajoutez-les-depots-officiels-asus-12-04-et-12-10-uniquement/#​comment-823218456|la-vache-libre.org]] Ajoutez les dépôts officiels ASUS : [[http://​la-vache-libre.org/​ubuntu-ajoutez-les-depots-officiels-asus-12-04-et-12-10-uniquement/#​comment-823218456|la-vache-libre.org]]
  • liste_portables_asus.1597172079.txt.gz
  • Dernière modification: Le 11/08/2020, 20:54
  • par Olivier V